HS6E Safety Switch with Solenoid

A safety switch with small solenoids at five built-in contact points.
[Features]
・ External dimensions are 75 × 15 × 75 mm
・ Reversible mounting of switch body and diagonal cable pull-out support 4 patterns of actuator pushing directions
・ The HS6E mode's current consumption is 24 V DC 110 mA (solenoid 100 mA, LED 10 mA) to save energy. It can be driven directly from the controller
・ Manual unlocking can be operated from 3directions: both mounting surfaces and the actuator insertion direction
・ With an LED indicator light that allows the operating status of the solenoid to be visually recognized in a wide viewing angle
〈Spring lock type〉
・ Automatically locks the actuator without power supply to the solenoid
・ High safety to unlock the machine by solenoid operation by an electric signal from the controller, etc., after the machine stops inertial operation
・ In case of power failure or maintenance, it can be unlocked by manual unlocking from 3 directions
〈Solenoid lock type〉
・ Lock the actuator by applying voltage to the solenoid from the controller, etc.
・ Unlocked by removing voltage to solenoid
・ When there is no need to lock for safety reasons, it is possible to realize a lock function compatible with production convenience, such as preventing equipment from sudden stop