Push Button Switch (Round Body Shape φ30), ZAP
Caution
Product Description
[Features]
· Features type-Z microswitches for a long lifespan.
· Microswitches allow for direct switching even under heavy loads.
· A cushioning mechanism in the operational section protects the switch.
· The push button is drip-proof, allowing it to be used in areas with oil, water, or dust in the air.
· 3 types of operational forms and 6 colors.
Push Button Switch Round Body Type ø30 (30 mm Diameter) ZAP Specifications
ZAP external appearance
Type ZAP-□ actuator dimensional diagram
Type 2ZAP-□ actuator dimensional diagram
Type ZAP-□ Type 2ZAP dimensional diagram
*chrome plated
Type ZAP-1□ Type 2ZAP-1□ dimensional diagram
*chrome plated
Type ZAP-2□ Type 2ZAP-2□ dimensional diagram
*chrome plated
Panel cutting dimensions
Shared items / unit: mm
Note. Tolerance for unspecified components are ±0.8 mm.
ZAP Types
| Classification | Number Of Outputs | Operating Part Color | ||
|---|---|---|---|---|
| Blue (-A) | Black (-B) | Green (-G) | ||
| Momentary Action | 1 | Type ZAP-A | Type ZAP-B | Type ZAP-G |
| 2 | - | Type 2ZAP-B | Type 2ZAP-G | |
| 1 | - | Type ZAP-1B | Type ZAP-1G | |
| 2 | Type 2ZAP-1A | - | - | |
| 1 | - | Type ZAP-2B | Type ZAP-2G | |
| Classification | Number Of Outputs | Operating Part Color | ||
|---|---|---|---|---|
| Red (-R) | White (-W) | Yellow (-Y) | ||
| Momentary Action | 1 | Type ZAP-R | Type ZAP-W | Type ZAP-Y |
| 2 | Type 2ZAP-R | - | - | |
| 1 | Type ZAP-2R | - | - | |
| 2 | Type 2ZAP-2R | - | - | |
Note. Specialty products are prepared for cases in high-humidity conditions or outdoor use.
Please contact our support center for details.
ZAP Rated Value
| Built-in Switch | Rated Voltage (V) | Non-inductive Load (A) | Inductive Load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive Load | Lamp Load | Inductive Load | Electric Motor Load | ||||||
| Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | ||
| Type Z-15G5-B | 125 V AC | 15 | 3 | 1.5 | 15 | 5 | 2.5 | ||
| 200 V AC | 15 | 2.5 | 1.25 | 15 | 3 | 1.5 | |||
| 500 V AC | 10 | 1.5 | 0.75 | 6 | 1.5 | 0.75 | |||
| DC 8 | 15 | 3 | 1.5 | 15 | 5 | 2.5 | |||
| DC 14 | 15 | 3 | 1.5 | 10 | 5 | 2.5 | |||
| DC 30 | 6 | 3 | 1.5 | 5 | 5 | 2.5 | |||
| DC 125 | 0.5 | 0.5 | 0.5 | 0.05 | 0.05 | 0.05 | |||
| DC 250 | 0.25 | 0.25 | 0.25 | 0.03 | 0.03 | 0.03 | |||
Note 1. The above values show regular current.
Note 2. Inductive load will have a power factor of 0.4 or higher (AC), and a time constant of 7 ms or less (DC).
Note 3. Lamp load has a 10x inrush current.
Note 4. Electric motor loads have a 6x inrush current.
Note 5. The rated values described above were tested at the conditions below based on JIS C4505.
- 1. Ambient temperature: 20 ±2℃
- 2. Ambient humidity: 65 ±5% RH
- 3. Operating frequency: 20 times/min.
ZAP Performance
| Permitted Operation Frequency | Mechanical | 60 times/min. |
|---|---|---|
| Electrical | 20 times/min. | |
| Insulation Resistance | 100 MΩ or higher (with 500 V DC megger) | |
| Contact Resistance | 30 mΩ or less (initial value) | |
| Withstand Voltage | Between Same Pole Terminals | 1,000 V AC 50/60 Hz 1 min. |
| Between Charging Metal And Ground, Between Each Terminal And Non-Charging Metal | 2,000 V AC 50/60 Hz 1 min | |
| Vibration | Malfunction | 10 to 55 Hz double amplitude 1.5 mm (within 1 ms) |
| Shock | Durability | Max. 500 m/s2 |
| Malfunction | Max. 200 m/s2 (within 1 ms) | |
| Durability | Mechanical | 1,000,000 times or more |
| Electrical | 500,000 times or more | |
| Mass | Approx. 130 to 210 g | |
| Inrush Current | Normally Closed Circuit | Max. 30 A |
| Normally Open Circuit | Max. 15 A | |
| Ambient Operating Temperature | -25℃ to +80°C (with no icing and no condensation) | |
| Operating Ambient Humidity | 35 to 85% RH | |
| Storage Ambient Temperature | -25℃ to +80°C (with no icing and no condensation) | |
| Protective Structure | Corresponds to IP65 (push button component only) | |
| Class Of Electric Shock Protection | Class II | |
| PTI (Tracking Properties) | 175 | |
| Degree Of Pollution | 3 (IEC947-5-1) | |
ZAP Operating Properties
| Operating Properties | Type ZAP-□□ | Type 2ZAP-□□ |
|---|---|---|
| Force Required For Operation OF | 5.88 to 14.71 N | 9.81 to 17.70 N |
Note. OF will change depending on the thickness of the installation panel.
ZAP Contact Type
| Name | Contact Type | |
|---|---|---|
| Double-Throw (C Contact) | COM | NC |
| NO | ||
ZAP Safety Standards
The built-in switch model Z-15G5-B is certified by UL and CSA.
- *Please see the catalog for product information not listed above.