Terminal block XW4 series for printed circuit boards.

Terminal block XW4 series for printed circuit boards.

[Features]
· A terminal block for printed circuit boards. Ideal for control equipment interfaces.
· A push-in type.
· 3.5 mm and 5.0 mm pitch terminal blocks.
· Single wires with a rod terminal are easy to connect by simply inserting.
· Strand wires can be easily connected using a standard screwdriver.
· A screw type.
· 3.81 mm and 5.08 mm pitch terminal blocks.
· The connection terminal screw part has a finger protection structure.
· Can be connected even without a crimp terminal.
· Features a unique wire crimp structure in which no direct force is applied to the soldered areas of the circuit board.

PDF

Japanese Only

Push-In Type / Screw-Type Terminal Blocks For Circuit Boards

Used for control equipment interfaces.

Used for control equipment interfaces.

XW4 PCB Terminal Block Outline Drawings/Dimensions

Horizontal type - model XW4C-□□D1-H1 outline drawing

Horizontal type - model XW4C-□□D1-H1 outline drawing

Dimensional drawing

Dimensional drawing

PCB processing dimensions

PCB processing dimensions

Vertical type - model XW4C-□□D1-V1 outline drawing

Vertical type - model XW4C-□□D1-V1 outline drawing

Dimensional drawing

Dimensional drawing

PCB processing dimensions

PCB processing dimensions

Dimensions (mm)
Number of Contacts
AB
28.43.5
311.97.0
415.410.5
518.914.0
622.417.5
725.921.0
829.424.5
932.928.0
1036.431.5

Table of Dimensions

ShapeHorizontal TypeVertical Type
Number of ContactsModelModel
2Model XW4C-02D1-H1Model XW4C-02D1-V1
3Model XW4C-03D1-H1Model XW4C-03D1-V1
4Model XW4C-04D1-H1Model XW4C-04D1-V1
5Model XW4C-05D1-H1Model XW4C-05D1-V1
6Model XW4C-06D1-H1Model XW4C-06D1-V1
7Model XW4C-07D1-H1Model XW4C-07D1-V1
8Model XW4C-08D1-H1Model XW4C-08D1-V1
9Model XW4C-09D1-H1Model XW4C-09D1-V1
10Model XW4C-10D1-H1Model XW4C-10D1-V1

Model

  • *Refer to the catalog for model numbers and types other than those above.

XW4 Specifications

Model XW4C Terminal Block for Circuit Boards (Push-In Type)

ModelModel XW4C-□□D1-□□Model XW4C-□□E1-□□Note
Terminal Pitch: 3.5 mmTerminal Pitch: 5.0 mm
IEC/DIN VDE *1Rated Voltage200 V AC400 V AC 
Rated Current17.5 A24 AAmbient Temperature: 40°C or Less
UL/CSA *2Rated Voltage300 V AC300 V AC 
Rated Current10 A10 A 
Withstand Voltage2,500 V AC4,000 V AC1 min
Insulation Resistance5 MΩ or Less (500 V DC) 
Wire Stripping Length10 mm *3±1 mm
Operating Temperature Range-40 to +100°C (Assuming No Condensation or Freezing) 

Model XW4C Terminal Block for Circuit Boards (Push-In Type)
*1. Rated to conform with IEC and DIN VDE standards.
*2. Rated to conform with UL and CSA standards.
*3. If using rod terminals, make sure the wiring setup is appropriate for the rod terminals to be used.

ModelModel XW4C
HousingPA (UL94 V-0)/Green
ContactCopper Alloy / Tin Plating (5 μm)
SpringStainless Steel
CoverPA (UL94 V-0)/Green

Material / surface treatment

 3.5 mm Pitch5.0 mm Pitch
Single Wire0.2 mm2 to 1.5 mm20.2 mm2 to 4.0 mm2
Stranded wire0.2 mm2 to 1.5 mm20.2 mm2 to 2.5 mm2
Rod TerminalWithout Sleeve0.25 mm2 to 1.5 mm20.25 mm2 to 2.5 mm2
With Sleeve0.25 mm2 to 0.75 mm20.25 mm2 to 1.5 mm2
AWG24-1624-12

Conforming wire

Model XW4 Terminal Block for Circuit Boards (Screw Type), Connector Terminal Block

ModelModel XW4E-□□B1-V1
Model XW4E-□□B1-S1
(Small / Inclined Type Terminal Block)
Model XW4E-□□B2-V1
(Double-Tier Terminal Block)
Model XW4A-□□B1-H1
Model XW4A-□□B1-V1
Model XW4B-□□B1-H1
(Connector Terminal Block)
Note
Terminal Pitch: 3.81 mm
IEC/DIN, VDE *1Rated Voltage160 V AC 
Rated Current10 A8 A8 AAmbient Temperature: 40°C or Less
UL/CSA *2Rated Voltage300 V AC 
Rated Current10 A8 A 
Withstand Voltage2,500 V AC1 min
Insulation Resistance100 MΩ or More500 V DC
Connecting Wire RangeAWG26 to AWG16AWG28 to AWG16Strand Wire
Wire Stripping Length5 mm7 mm±1 mm
Tightening Torque0.22 to 0.25 N·m 
Operating Temperature Range-40 to +100°C (Assuming No Condensation or Freezing) 

Type with a terminal pitch of 3.81 mm

ModelModel XW4E-□□C1-V1
Model XW4E-□□C1-S1
(Small / Inclined Type Terminal Block)
Model XW4E-□□C2-V1
(Double-Tier Terminal Block)
Model XW4A-□□C1-H1
Model XW4A-□□C1-V1
Model XW4B-□□C1-H1
(Connector Terminal Block)
Note
Terminal Pitch: 5.08 mm
IEC/DIN, VDE *1Rated Voltage250 V AC 
Rated Current13.5 A14 A12 AAmbient Temperature: 40°C or Less
UL/CSA *2Rated Voltage300 V AC 
Rated Current10 A16 A15 A 
Withstand Voltage3,000 V AC1 min
Insulation Resistance100 MΩ or More500 V DC
Connecting Wire RangeAWG26 to AWG16AWG24 to AWG14Strand Wire
Wire Stripping Length6 mm7 mm±1 mm
Tightening Torque0.5 to 0.6 N·m 
Operating Temperature Range-40 to +100°C (Assuming No Condensation or Freezing) 

Type with a terminal pitch of 5.08 mm

ModelModel XW4E
(Small / Inclined Type / Double Tier Terminal Block)
Model XW4A
(Connector Type Terminal Block / Circuit Board Side)
Model XW4B
(Connector Type Terminal Block / Wire Side)
HousingPA (UL94 V-0)/GreenPBT (UL94 V-0) / Green or
PA (UL94 V-0) / Green
PA (UL94 V-0)/Green
Terminal ScrewCopper Alloy / Tin Plating-Copper Alloy / Tin Plating
Clamp GaugeCopper Alloy / Nickel Plating-Copper Alloy / Nickel Plating
ContactCopper Alloy / Nickel Base, Tin Plating

Material / surface treatment

How To Connect This Product

Push-In Type Terminal Block Connection Method (Model XW4C)

How to connect when using a rod terminal / single wire

How to connect when using a rod terminal / single wire

How to remove

How to remove

How to connect / remove when using bare wire

How to connect / remove when using bare wire

TypeAB
Maximum1.610.0
Minimum1.1

Applicable terminal block information - 3.5 mm pitch (units: mm)

TypeAB
Maximum2.110.0
Minimum1.1

Applicable terminal block information - 5.0 mm pitch (units: mm)

Reference pitch dimensional drawing

Reference pitch dimensional drawing

  • *Do not apply excessive force to the terminal block when inserting tools. Doing so may cause damage to the terminal block.

How to connect screw-type terminal blocks
(Model XW4A, Model, XW4B, Model XW4E)

When using crimp terminals

  1. 1. Use rod type or plate type terminals. However, as the terminal block is a small type, be sure to check the information listed below before use.
  2. 2. When using crimp terminals, be aware that the insulation between the crimp terminals will be not be a finger-protecting structure if bare crimp terminals are used. Also be aware that the insulation distance between adjacent terminal blocks will be smaller.

Tightening terminal block screws
(Model XW4A, Model XW4B, Model XW4E)

  1. 1.Use a dedicated screwdriver (Model XW4Z-00B, -00C) when tightening terminal screws. Because it matches the slot width of the terminal screws, it will not damage the terminal screws.
  2. 2. Tighten the terminal screws according to "Tightening Torques" detailed in "Ratings/Performance". Doing this will prevent the screws from becoming loose or the wires from disconnecting.

Performing continuity checks on the terminal block screw heads
(Model XW4A, Model XW4B, Model XW4E)

Make sure the screws are tightened when performing continuity checks on the screw heads.
If a screw is not tightened or only partially tightened, it may cause it to become structurally non-conductive.

Part Number
XW4A-02B1-H1
XW4A-02B1-V1
XW4A-02C1-H1
XW4A-02C1-V1
XW4A-03B1-H1
XW4A-03B1-V1
XW4A-03C1-H1
XW4A-03C1-V1
XW4A-04B1-H1
XW4A-04B1-V1
XW4A-04C1-H1
XW4A-04C1-V1
XW4A-05B1-H1
XW4A-05B1-V1
XW4A-05C1-H1
XW4A-05C1-V1
XW4A-06B1-H1
XW4A-06B1-V1
XW4A-06C1-H1
XW4A-06C1-V1
XW4A-07B1-H1
XW4A-07B1-V1
XW4A-07C1-H1
XW4A-07C1-V1
XW4A-08B1-H1
XW4A-08B1-V1
XW4A-08C1-H1
XW4A-08C1-V1
XW4A-09B1-H1
XW4A-09B1-V1
XW4A-09C1-H1
XW4A-09C1-V1
XW4A-10B1-H1
XW4A-10B1-V1
XW4A-10C1-H1
XW4A-10C1-V1
XW4B-02B1-H1
XW4B-02C1-H1
XW4B-03B1-H1
XW4B-03C1-H1
XW4B-04B1-H1
XW4B-04C1-H1
XW4B-05B1-H1
XW4B-05C1-H1
XW4B-06B1-H1
XW4B-06C1-H1
XW4B-07B1-H1
XW4B-07C1-H1
XW4B-08B1-H1
XW4B-08C1-H1
XW4B-09B1-H1
XW4B-09C1-H1
XW4B-10B1-H1
XW4B-10C1-H1
XW4C-02D1-H1
XW4C-02D1-V1
XW4C-02E1-H1
XW4C-02E1-V1
XW4C-03D1-H1
XW4C-03D1-V1
Part NumberVolume DiscountDays to ShipRoHSWiring Method Mounting Method Number of Poles
(Pole)
Screw Size Rated current (VDE)
(A)
Rated current (IEC/DIN)
(A)
Rated current (UL/CSA)
(A)
Type Connector Shape Pitch Between Terminals
(mm)
Conforming Wire
1 Day(s) -ScrewPCB2-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB2-888Connector terminal blockStraight terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB2-121216Connector terminal blockL type terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB2-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB3-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB3-888Connector terminal blockStraight terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB3-121216Connector terminal blockL type terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB3-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
1 Day(s) -ScrewPCB4-888Connector terminal blockL type terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB4-888Connector terminal blockStraight terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB4-121216Connector terminal blockL type terminal5.08AWG24-AWG14
1 Day(s) -ScrewPCB4-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB5-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB5-888Connector terminal blockStraight terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB5-121216Connector terminal blockL type terminal5.08AWG24-AWG14
Quote -ScrewPCB5-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
1 Day(s) -ScrewPCB6-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB6-888Connector terminal blockStraight terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB6-121216Connector terminal blockL type terminal5.08AWG24-AWG14
Quote -ScrewPCB6-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB7-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB7-888Connector terminal blockStraight terminal3.81AWG28-AWG16
Quote -ScrewPCB7-121216Connector terminal blockL type terminal5.08AWG24-AWG14
Quote -ScrewPCB7-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB8-888Connector terminal blockL type terminal3.81AWG28-AWG16
3 Day(s) or more -ScrewPCB8-888Connector terminal blockStraight terminal3.81AWG28-AWG16
3 Day(s) or more 10ScrewPCB8-121216Connector terminal blockL type terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB8-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB9-888Connector terminal blockL type terminal3.81AWG28-AWG16
Quote -ScrewPCB9-888Connector terminal blockStraight terminal3.81AWG28-AWG16
Quote -ScrewPCB9-121216Connector terminal blockL type terminal5.08AWG24-AWG14
Quote -ScrewPCB9-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB10-888Connector terminal blockL type terminal3.81AWG28-AWG16
1 Day(s) -ScrewPCB10-888Connector terminal blockStraight terminal3.81AWG28-AWG16
Quote -ScrewPCB10-121216Connector terminal blockL type terminal5.08AWG24-AWG14
3 Day(s) or more -ScrewPCB10-121216Connector terminal blockStraight terminal5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection2-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
1 Day(s) -ScrewSocket connection2-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection3-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
1 Day(s) -ScrewSocket connection3-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection4-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
1 Day(s) -ScrewSocket connection4-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection5-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
1 Day(s) -ScrewSocket connection5-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection6-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
1 Day(s) -ScrewSocket connection6-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
3 Day(s) or more -ScrewSocket connection7-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
Quote -ScrewSocket connection7-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection8-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
3 Day(s) or more -ScrewSocket connection8-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection9-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
Quote -ScrewSocket connection9-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -ScrewSocket connection10-888Connector terminal blockCable pullout type (with screw)3.81AWG28-AWG16
3 Day(s) or more -ScrewSocket connection10-121215Connector terminal blockCable pullout type (with screw)5.08AWG24-AWG14
1 Day(s) -Push-inPCB2Push-in method17.517.510PCB terminal blockHorizontal type3.5AWG24-AWG16
1 Day(s) 10Push-inPCB2Push-in method17.517.510PCB terminal blockVertical type3.5AWG24-AWG16
3 Day(s) or more 10Push-inPCB2Push-in method242410PCB terminal blockHorizontal type5AWG24-AWG12
Quote -Push-inPCB2Push-in method242410PCB terminal blockVertical type5AWG24-AWG12
3 Day(s) or more 10Push-inPCB3Push-in method17.517.510PCB terminal blockHorizontal type3.5AWG24-AWG16
3 Day(s) or more -Push-inPCB3Push-in method17.517.510PCB terminal blockVertical type3.5AWG24-AWG16

Loading...

 

Basic Information

Parts/Completed products Assembled product

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)