Dip Timer H3FA
Caution
Product Description
Dip timer H3FA
[Features]
· A timer for use on a PCB of contact / non-contact output type.
· Two types are provided for control output, with the contact output (1a, 1b) it is 3A (AC250V low resistance load), with the non-contact output there is a maximum of 150mA and high capacity.
· 1 sec./10 sec./1 min./10 min. (type A), 6 sec./60 sec./6 min./60 min. (type B) with four time types in one apparatus offering multiple functions.
· The time can be operated remotely by the connection to an external varistor.
· Completely washable.
· A small scale size enabling installation in a one-inch-pitch rack (length × width × height: 17.75 × 36.9 × 19.5 mm).
· UL/CSA acquired.
DIP Timer Specifications
H3FA external appearance
H3FA outline drawing
Time Specifications
| Format | Maximum Scale Time | Set Time Range |
|---|---|---|
| Series H3FA-A Series H3FA-SA Series H3FA-AU | 1 s | 0.1 to 1 s |
| 10 s | 1 to 10 s | |
| 1 min | 0.1 to 1 min | |
| Series H3FA-B Series H3FA-SB Series H3FA-BU | 6 s | 0.6 to 6 s |
| 60 s | 6 to 60 s | |
| 6 min | 0.6 to 6 min |
Note 1. The above timing ranges apply when the internal variable resistor of Series H3FA is used.
Note 2. The external variable resistor may also be used by opening the terminal connected to the internal variable resistor.
Note 3. Wire the appropriate terminal to select a time setting range.
Performance
| Variations In Operating Time | ±0.5% or less (percentage relative to maximum scale time) *1 *3 | |
|---|---|---|
| Set Error | 0 to +30% or less (percentage relative to maximum scale time, at 20°C, at rated voltage) | |
| Recovery Time | 10 ms or less | |
| Voltage Effect | ±1% or less (Percentage relative to maximum scale time. However, it is ±2% or less for 5, 6, 5/6 V DC.) | |
| Temperature Effect | ±5% or less (percentage relative to maximum scale time) *1 | |
| Insulation Resistance | 100 MΩ or more (at 500 V DC megger) | |
| Withstand Voltage | 1,500 V AC, 50/60 Hz, 1 min (between control output and operation circuit) *2 1,000 V AC, 50/60 Hz, 1 min (between non-continuous contacts) *2 | |
| Vibration | Endurance | 10 to 55 Hz, half amplitude 0.375mm, 3 directions, 2 h each |
| Malfunction | 10 to 55 Hz, half amplitude 0.25mm, 3 directions, 10 min each | |
| Shock | Endurance | 1,000 m/s2, 3 axes, 6 directions, 3 times each |
| Malfunction | 100 m/s2, 3 axes, 6 directions, 3 times each | |
| Life | Mechanical | 10 million operations or more (no load, switching frequency 1,800 operations/h) *2 |
| Electrical | 100,000 operations or more (250 V AC, 3 A, resistive load, switching frequency 1,800 operations/h) *2 | |
| Mass | Contact output type approx. 15 g, non-contact output type approx. 10 g | |
* 2. Applies to the contact point type.
* 3. When using the internal variable resistor of Series H3FA. (Not including when an externally connected resistor is used.)