LED Unit (Magnet Type for Maintenance and Inspections)

LED Unit (Magnet Type for Maintenance and Inspections)

Comes with a magnet sheet to enable easy removal.

[Use]
● Please use for lighting during the maintenance and inspection of power receiving and distributing panels, distribution boards, and control panels, etc.
[Features]
● Long life. Lasts five times longer than conventional fluorescent lighting.
● Energy saving. Power consumption is about half that of conventional fluorescent lighting.
● ECO. A clean light that does not use mercury.
● Low heat generation. Does not become hot and is safe like fluorescent lighting.
● Low ultraviolet rays. Since it hardly emits ultraviolet rays, pests are not attracted into the board or to its surroundings, and their intrusion can be prevented.
● Compact. Featuring a simple design that is compact and lightweight and which can be easily installed to boards.
● Low noise. A design that suppresses radiation and conduction noises.
● Can be mounted as desired. Because mounting is performed using a magnet sheet, illumination can be provided from the sides or from below, as well as from the upper portion in the board.
● The LED device used is made by Nichia Chemical Co., Ltd.

Part Number

Configured Part Number is shown.

CLED-1004MG

Part Number
CLED-1004MG
Part NumberVolume DiscountDays to ShipRoHS
4 Day(s) or more 10

Loading...

  1. 1

Basic Information

Shape Straight LED color White Input Voltage AC120V to AC240V
Illuminance(lx) 150 Protection Grade NA Dimension length(mm) 304
Dimension width(mm) 42 Dimension thickness(mm) 41 Switch position NA
Input Current(mA) 55 Power Consumption(W) 4.5 Ambient Operating Temperature(°C) -20 to +50
Total Luminous Flux(lm) 600 Illumination angle 160° LED lifespan(Time) 40000

Please check the type/dimensions/specifications of the part CLED-1004MG in the LED Unit (Magnet Type for Maintenance and Inspections) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)