XPM 2-Flute Stub XPM-TPDSS

XPM 2-Flute Stub XPM-TPDSS

Tapered end mill in which powder HSS XPM is used as the base material

Part Number
XPM-TPDSS-1X0.5
XPM-TPDSS-1X1
XPM-TPDSS-1X1.5
XPM-TPDSS-1X2
XPM-TPDSS-1X2.5
XPM-TPDSS-1X3
XPM-TPDSS-1.5X0.5
XPM-TPDSS-1.5X1
XPM-TPDSS-1.5X1.5
XPM-TPDSS-1.5X2
XPM-TPDSS-1.5X2.5
XPM-TPDSS-1.5X3
XPM-TPDSS-2X0.5
XPM-TPDSS-2X1
XPM-TPDSS-2X1.5
XPM-TPDSS-2X2
XPM-TPDSS-2X2.5
XPM-TPDSS-2X3
XPM-TPDSS-2.5X0.5
XPM-TPDSS-2.5X1
XPM-TPDSS-2.5X1.5
XPM-TPDSS-2.5X2
XPM-TPDSS-2.5X2.5
XPM-TPDSS-2.5X3
XPM-TPDSS-3X0.5
XPM-TPDSS-3X1
XPM-TPDSS-3X1.5
XPM-TPDSS-3X2
XPM-TPDSS-3X2.5
XPM-TPDSS-3X3
XPM-TPDSS-4X0.5
XPM-TPDSS-4X1
XPM-TPDSS-4X1.5
XPM-TPDSS-4X2
XPM-TPDSS-4X2.5
XPM-TPDSS-4X3
Part NumberVolume DiscountDays to ShipTip Diameter (D)
(φ)
Single Angle (θ)
(Degree)
Flute Length (l)
(mm)
Overall Length (L)
(mm)
Tool No. Large Tip Diameter D1
(mm)
3 Day(s) or more 10.52.547868011.04
3 Day(s) or more 113.548868111.12
3 Day(s) or more 11.53.548868211.18
3 Day(s) or more 12448868311.28
3 Day(s) or more 12.5448868411.35
Quote 13448868511.42
3 Day(s) or more 1.50.5347868021.55
3 Day(s) or more 1.51448868121.64
3 Day(s) or more 1.51.5448868221.71
3 Day(s) or more 1.52549868321.85
3 Day(s) or more 1.52.5549868421.94
3 Day(s) or more 1.53549868522.02
3 Day(s) or more 20.5549868032.09
3 Day(s) or more 21751868132.24
3 Day(s) or more 21.5751868232.37
3 Day(s) or more 22953868332.63
3 Day(s) or more 22.5953868432.79
3 Day(s) or more 23953868532.94
3 Day(s) or more 2.50.5549868042.59
3 Day(s) or more 2.51751868142.74
3 Day(s) or more 2.51.5751868242.87
3 Day(s) or more 2.52953868343.13
3 Day(s) or more 2.52.5953868443.29
3 Day(s) or more 2.53953868543.44
3 Day(s) or more 30.5650868053.1
3 Day(s) or more 31852868153.28
3 Day(s) or more 31.5852868253.42
3 Day(s) or more 321155868353.77
3 Day(s) or more 32.51155868453.96
3 Day(s) or more 331155868554.15
3 Day(s) or more 40.5852868064.14
3 Day(s) or more 411155868164.38
3 Day(s) or more 41.51155868264.58
3 Day(s) or more 421559868365.05
3 Day(s) or more 42.51559868465.31
3 Day(s) or more 431559868565.57

Loading...

  1. 1

Basic Information

Type Tapered Square Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Link Diameter (d)(mm) 6
Number of Flutes(sheet) 2 Torsion Angle Weak Helix (15 to 25°) Tool Material Type Powdered High-Speed Steel
Coating Non-Coated

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)