MUGEN-COATING PREMIUM 2-Flute LEAD 25 End Mill MXH225

MUGEN-COATING PREMIUM 2-Flute LEAD 25 End Mill MXH225

Supports heat-resistant alloys such as stainless steel, titanium, etc. Design with increased rigidity minimizes chattering and deflection during grooving

PDF

Part Number

Configured Part Number is shown.

 
Part Number
MXH225-0.1
MXH225-0.2
MXH225-0.3
MXH225-0.4
MXH225-0.5
MXH225-0.6
MXH225-0.7
MXH225-0.8
MXH225-0.9
MXH225-1
MXH225-1.1
MXH225-1.2
MXH225-1.3
MXH225-1.4
MXH225-1.5
MXH225-1.6
MXH225-1.7
MXH225-1.8
MXH225-1.9
MXH225-2
MXH225-2.5
MXH225-3
MXH225-4
MXH225-5
MXH225-6
Part NumberVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Manufacturer Code
3 Day(s) or more 0.10.144508-00005-00010
3 Day(s) or more 0.20.244508-00005-00020
3 Day(s) or more 0.30.344508-00005-00030
3 Day(s) or more 0.40.444508-00005-00040
3 Day(s) or more 0.50.544508-00005-00050
3 Day(s) or more 0.60.644508-00005-00060
3 Day(s) or more 0.70.744508-00005-00070
3 Day(s) or more 0.80.844508-00005-00080
3 Day(s) or more 0.90.944508-00005-00090
3 Day(s) or more 1144508-00005-00100
3 Day(s) or more 1.11.144508-00005-00110
3 Day(s) or more 1.21.244508-00005-00120
3 Day(s) or more 1.31.344508-00005-00130
3 Day(s) or more 1.41.444508-00005-00140
3 Day(s) or more 1.51.544508-00005-00150
3 Day(s) or more 1.61.644508-00005-00160
3 Day(s) or more 1.71.744508-00005-00170
3 Day(s) or more 1.81.844508-00005-00180
3 Day(s) or more 1.91.944508-00005-00190
3 Day(s) or more 2244508-00005-00200
3 Day(s) or more 2.52.544508-00005-00250
3 Day(s) or more 3364508-00005-00300
3 Day(s) or more 4464508-00005-00400
3 Day(s) or more 5565008-00005-00500
3 Day(s) or more 6665008-00005-00600

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Aluminum / Titanium / Copper / Resin Number of flutes(sheet) 2 Type Square
Coating For High Hardness (Silicone-Based) Machining Application Flat Surface / Side Surface / Groove Blade tip shape With Lead
Torsion Angle (θ) Weak Helix (15 to 25°) (γ) Neck Angle(°) 12

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)