• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 17:00 to 20:30 (MYT) 18/11/2018. We apologize for the inconvenience.

Electro-Deposited Diamond Wheel

Part Number

Configured Part Number is shown.



●For cutting and polishing.
●It is offset type.
●For finish polishing.


●For cutting and polishing of roof tile, marble, FRP, refractory brick, glass and granite, etc.
●Working Tool: Disc grinder.


●Grain Size(#):60
●Outer Diameter x Thickness x Hole Diameter(mm):100 x 14 x 15
Part Number
Part NumberVolume DiscountDays to ShipMass
Features Application
3 Day(s) or more 91.8For cutting and polishing. It is offset type. It is possible to electrodeposit, cut and polish diamonds on the front and back of the board at the same time. For final polishing.Polishing/cutting of roof tile, marble, FRP, refractory brick, glass, granite, etc. Tool used: Disc grinder.


  1. 1

Basic Information

Particle Size(#) 60 Outer Diameter(mm) 100 Thickness(mm) 14
Hole Diameter(mm) 15 Max. Rotational Speed(rpm) 15000 Trusco Code 171-4457

Please check the type/dimensions/specifications of the part UFO-2 in the Electro-Deposited Diamond Wheel series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)