Rolling Center NCF

Rolling Center NCF

Angular bearings, thrust bearings, and needle bearings are used in this device to provide smooth rotation torque. A labyrinth seal (non-contact) is adopted for watertightness when cutting oil is used.

Part Number

Configured Part Number is shown.

Part Number
NCF3-001
NCF3-002
NCF3-021
NCF3-022
NCF4-001
NCF4-002
NCF4-003
NCF4-021
NCF4-022
NCF4-023
NCF5-001
NCF5-002
NCF5-003
NCF5-004
NCF5-005
NCF5-021
NCF5-022
NCF5-023
NCF5-024
NCF5-025
Part NumberVolume DiscountDays to ShipType A
(mm)
B
(mm)
B1
(mm)
C
(mm)
C1
(mm)
D
(mm)
E
(mm)
e
(mm)
L
(mm)
Features Deflection at Center (Max.) Super Hard Diameter Maximum Number of Rotation
(min-1)
9 Day(s) or more A532212854.552.53620173.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-4500
9 Day(s) or more B5322-854.552.532.5-170Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-4500
Quote A, with Carbide532212854.552.53620173.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003104500
9 Day(s) or more B, with Carbide5322-854.552.532.5-170Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003104500
9 Day(s) or more A6227121085.360.54320211.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-4000
Quote B6227-1085.360.537.5-206Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-4000
9 Day(s) or more C622781085.360.54230210.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-4000
9 Day(s) or more A, with Carbide6227121085.360.54320211.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003104000
9 Day(s) or more B, with Carbide6227-1085.360.537.5-206Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003144000
9 Day(s) or more C, with Carbide622781085.360.54230210.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.00384000
Quote A6830141366.364.54622246.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-3800
9 Day(s) or more B6830-1366.364.541-241.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-3800
9 Day(s) or more C683081366.364.54630246.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-3800
9 Day(s) or more E6830131366.364.56025260.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-3800
9 Day(s) or more F6830151366.364.550-250.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003-3800
9 Day(s) or more A, with Carbide6830141366.364.54622246.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003103800
9 Day(s) or more B, with Carbide6830-1366.364.541-241.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003183800
9 Day(s) or more C, with Carbide683081366.364.54630246.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.00383800
9 Day(s) or more E, with Carbide6830131366.364.56025260.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003103800
9 Day(s) or more F, with Carbide6830151366.364.550-250.5Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechanism (non-contact) is adopted for watertightness when cutting oil is used.TIR0.003103800

Loading...

  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)