Gem New Motor

Part Number

Configured Part Number is shown.



●By adopting the special air hose, the noise value was reduced by 10dB compared with conventional products. 
●Rubber sleeve of standard accessories increases grip power, absorbs vibration and reduces fatigue.


●For metal burring, chamfering, polishing.


●Chuck Inner Diameter(mm):3
●No Load Speed(min-1):60000
●Air Consumption(m3/min):0.16
●Hose Intake Port:R1/4
●Total Length(mm):137
●Working Air Pressure: 0.5MPa 
●Throttle System: ON/OFF Valve
Part Number
Part NumberVolume DiscountDays to ShipMass
Advantages Use Throttle system
3 Day(s) or more 100Adoption of a special air hose has reduced the noise value by 10 horn sounds compared to conventional products. Rubber sleeves of the standard accessories have excellent grip, and absorb vibration to reduce tiredness.For metal deburring, chamfering, and polishing.ON/OFF Valve


  1. 1

Basic Information

Chuck Inner Diameter(mm) 3 Number of No-load Revolutions(rpm) 60000 Body / Related Products Body
Operating Air Pressure(Mpa) 0.5 Total Length(mm) 137 Exhaust Rear
Air Consumption (m3/min) 0.16 Hose Take-in Port R1/4 Trusco Code 106-6838

Please check the type/dimensions/specifications of the part U-101 in the Gem New Motor series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)