• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 21:00 (MYT) 21/4/2019. We apologize for the inconvenience.

Peck Marker AP-03/AP-PH3

Part Number

Configured Part Number is shown.


●Marking tool with compressor as the starting source.
●Possible to perform shallow, deep digging by air adjustment.
●HV510 or less soft iron material, plastic, non-ferrous metal and other stainless steel products can be marked.


●Body Diameter x Total Length(mm):17 x 159
●Working Air Pressure(MPa):0.4 to 0.7
●Frequency: Approx. 30000spm
Part Number
Part NumberVolume DiscountDays to ShipMass
Marking suitability Use Material Features Specifications
2 Day(s) or more 250Usable on: Plastic, Glass, Non-Ferrous Metal, Soft Iron, Hardened Steel (HV510 or Less), Stainless Steel / Not usable on: Carbide AlloyFor marking of molds, molded items, tools, cutlery, glass etc. For non-ferrous metal patterning and workmanship. For sand drop of holes and fine parts of cast iron products.Bit: Cemented CarbideDeep and clear engraving is possible owing to its ultra-micro vibration of 500 times per second or more. Engraving is also possible on hardened products (HV510 or less).Operating Air Pressure: 0.4–0.7 MPa
2 Day(s) or more 4-Penholder for AP-03---


  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)