Insert for Phoenix Series Round Insert Cutter
Brand :
OSG
Caution
Product Description
An insert for OSG-PHENIX PCR. Can be set according to the notch of inserts.
Drawing
Recommended cutting conditions
Recommended cutting condition table
Maximum tilt angle during ramping (E)
Precautions for cutting conditions
- The recommended cutting condition table represents the recommended value for the short shank type.
- The values in the recommended cutting condition table show general values at actual cutting speed. Please adjust appropriately according to the cutting environment.
Compatible work material
Recommended material for each work material
◎: First recommended material○: Second recommended material · NM: For aluminum alloy · GL: For light/medium cutting · GM: For medium cutting · HR: For high hardness steel · SM: For heat-resistant alloys
Selection support information
Round insert cutter, straight shank type, PRC SS
Type 1
With lubrication hole
Type 2
With lubrication hole
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Shank diameter DCON | Overall length LF | Body length LH | Weight (kg) | Compatible insert | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|
| 7800300 | PRC10R020SS20-2S | 20 | 10 | 2 | 20 | 130 | 50 | 0.27 | (1) | 1 |
| 7800303 | PRC10R020SS20-2L | 20 | 10 | 2 | 20 | 180 | 80 | 0.38 | 1 | |
| 7800301 | PRC10R025SS25-3S | 25 | 15 | 3 | 25 | 140 | 60 | 0.44 | 1 | |
| 7800304 | PRC10R025SS25-3L | 25 | 15 | 3 | 25 | 200 | 120 | 0.62 | 1 | |
| 7800302 | PRC10R032SS32-4S | 32 | 22 | 4 | 32 | 150 | 70 | 0.80 | 1 | |
| 7800305 | PRC10R032SS32-4L | 32 | 22 | 4 | 32 | 200 | 120 | 1.05 | 1 | |
| 7800322 | PRC12R024SS25-2S | 24 | 12 | 2 | 25 | 140 | 60 | 0.44 | (2) | 1 |
| 7800323 | PRC12R024SS25-2L | 24 | 12 | 2 | 25 | 180 | 100 | 0.56 | 1 | |
| 7800318 | PRC12R030SS32-2S | 30 | 18 | 2 | 32 | 150 | 70 | 0.75 | 1 | |
| 7800319 | PRC12R030SS32-2L | 30 | 18 | 2 | 32 | 200 | 120 | 0.96 | 1 | |
| 7800306 | PRC12R032SS32-2S | 32 | 20 | 2 | 32 | 150 | 70 | 0.79 | 1 | |
| 7800309 | PRC12R032SS32-2L | 32 | 20 | 2 | 32 | 200 | 120 | 1.04 | 1 | |
| 7800320 | PRC12R032SS32-3S | 32 | 20 | 3 | 32 | 150 | 70 | 0.78 | 1 | |
| 7800321 | PRC12R032SS32-3L | 32 | 20 | 3 | 32 | 200 | 120 | 1.02 | 1 | |
| 7800307 | PRC12R040SS32-3S | 40 | 28 | 3 | 32 | 150 | 50 | 0.88 | 2 | |
| 7800310 | PRC12R040SS32-3L | 40 | 28 | 3 | 32 | 250 | 50 | 1.49 | 2 | |
| 7800308 | PRC12R050SS42-4S | 50 | 38 | 4 | 42 | 150 | 50 | 1.52 | 2 | |
| 7800311 | PRC12R050SS42-4L | 50 | 38 | 4 | 42 | 250 | 50 | 2.58 | 2 | |
| 7800324 | PRC16R032SS32-2S | 32 | 16 | 2 | 32 | 150 | 70 | 0.78 | (3) | 1 |
| 7800325 | PRC16R032SS32-2L | 32 | 16 | 2 | 32 | 200 | 120 | 1.05 | 1 | |
| 7800312 | PRC16R040SS32-2S | 40 | 24 | 2 | 32 | 150 | 50 | 0.85 | 2 | |
| 7800315 | PRC16R040SS32-2L | 40 | 24 | 2 | 32 | 250 | 50 | 1.46 | 2 | |
| 7800313 | PRC16R050SS42-3S | 50 | 34 | 3 | 42 | 150 | 50 | 0.49 | 2 | |
| 7800316 | PRC16R050SS42-3L | 50 | 34 | 3 | 42 | 250 | 50 | 2.55 | 2 | |
| 7800314 | PRC16R063SS42-4S | 63 | 47 | 4 | 42 | 150 | 50 | 1.63 | 2 | |
| 7800317 | PRC16R063SS42-4L | 63 | 47 | 4 | 42 | 250 | 50 | 2.69 | 2 |
Round insert cutter, bore type, PRC BORE
Type 1
With lubrication hole (power screw specification)
Type 2
With lubrication hole
Type 3
Without oil hole
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Cutter Height LF | Boss diameter DCSFMS | Hole diameter DCON | Flange keyway | Weight (kg) | Compatible in sert | Shape Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width KWW | Depth b | |||||||||||
| 7800200 | PRC12R050M22-4 | 50 | 38 | 4 | 40 | 45 | 22 | 10.4 | 6.3 | 0.27 | (2) | 2 |
| 7800204 | PRC12R050M22-5 | 50 | 38 | 5 | 40 | 45 | 22 | 10.4 | 6.3 | 0.79 | 2 | |
| 7800201 | PRC12R063M22-4 | 63 | 51 | 4 | 40 | 50 | 22 | 10.4 | 6.3 | 0.43 | 2 | |
| 7800206 | PRC12R063M22-6 | 63 | 51 | 6 | 40 | 50 | 22 | 10.4 | 6.3 | 0.44 | 2 | |
| 7800209 | PRC12R080M25.4-5 | 80 | 68 | 5 | 50 | 60 | 25.4 | 9.5 | 6 | 0.85 | 2 | |
| 7800202 | PRC12R080M27-5 | 80 | 68 | 5 | 50 | 60 | 27 | 12.4 | 7 | 0.83 | 2 | |
| 7800211 | PRC12R080M25.4-8 | 80 | 68 | 8 | 50 | 60 | 25.4 | 9.5 | 6 | 0.93 | 2 | |
| 7800207 | PRC12R080M27-8 | 80 | 68 | 8 | 50 | 60 | 27 | 12.4 | 7 | 0.92 | 2 | |
| 7800210 | PRC12R100M31.7-6 | 100 | 88 | 6 | 50 | 70 | 31.75 | 12.7 | 8 | 1.22 | 3 | |
| 7800203 | PRC12R100M32-6 | 100 | 88 | 6 | 50 | 70 | 32 | 14.4 | 8 | 1.36 | 2 | |
| 7800212 | PRC12R100M31.7-10 | 100 | 88 | 10 | 50 | 70 | 31.75 | 12.7 | 8 | 1.29 | 3 | |
| 7800208 | PRC12R100M32-10 | 100 | 88 | 10 | 50 | 70 | 32 | 14.4 | 8 | 1.43 | 2 | |
| 7800213 | PRC16R050M22-3 | 50 | 34 | 3 | 40 | 45 | 22 | 10.4 | 6.3 | 0.28 | (3) | 1 |
| 7800214 | PRC16R063M22-5 | 63 | 47 | 5 | 40 | 50 | 22 | 10.4 | 6.3 | 0.37 | 2 | |
| 7800218 | PRC16R080M25.4-6 | 80 | 64 | 6 | 50 | 60 | 25.4 | 9.5 | 6 | 0.84 | 2 | |
| 7800216 | PRC16R080M27-6 | 80 | 64 | 6 | 50 | 60 | 27 | 12.4 | 7 | 0.83 | 2 | |
| 7800219 | PRC16R100M31.7-7 | 100 | 84 | 7 | 50 | 70 | 31.75 | 12.7 | 8 | 1.20 | 3 | |
| 7800217 | PRC16R100M32-7 | 100 | 84 | 7 | 50 | 70 | 32 | 14.4 | 8 | 1.32 | 2 | |
Round insert cutter, screw-in type, PRC SF
With lubrication hole
PRC screw-in type
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Mounting diameter DCON | Screw size CRKS | Wrench Size | Overall length LF | End face diameter DCSFMS | Weight (kg) | Compatible in sert |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7801700 | PRC10R020SF10-2 | 20 | 10 | 2 | 10.5 | M10 | 14 | 33 | 18 | 0.06 | (1) |
| 7801701 | PRC10R025SF12-3 | 25 | 15 | 3 | 12.5 | M12 | 17 | 35 | 23 | 0.09 | |
| 7801702 | PRC10R030SF16-3 | 30 | 20 | 3 | 17 | M16 | 22 | 40 | 28 | 0.16 | |
| 7801703 | PRC10R032SF16-4 | 32 | 22 | 4 | 17 | M16 | 22 | 40 | 28 | 0.17 | |
| 7801704 | PRC10R040SF16-4 | 40 | 30 | 4 | 17 | M16 | 22 | 40 | 28 | 0.21 | |
| 7801705 | PRC12R030SF16-2 | 30 | 18 | 2 | 17 | M16 | 22 | 40 | 28 | 0.16 | (2) |
| 7801706 | PRC12R032SF16-3 | 32 | 20 | 3 | 17 | M16 | 22 | 40 | 28 | 0.16 | |
| 7801707 | PRC12R040SF16-3 | 40 | 28 | 3 | 17 | M16 | 22 | 40 | 28 | 0.22 |
Compatible insert
| Nominal | Number of corners (cutting edges) | Insert dimensions | Carbide | |||
|---|---|---|---|---|---|---|
| Inscribed circle diameter IC | Thickness S | Relief angle AN | CK010 | |||
| (1) | RPHT10T3MOFN-NM | 8 | 10 | 3.97 | 11° | 7811009 |
| RPHW10T3MOSN | 8 | 10 | 3.97 | 11° | — | |
| — | ||||||
| RPHW10T3MOEN | 8 | 10 | 3.97 | 11° | — | |
| RPHT10T3MOEN-GL | 8 | 10 | 3.97 | 11° | — | |
| RPHT10T3MOEN-GM | 8 | 10 | 3.97 | 11° | — | |
| RPHT10T3MOEN-SM | 4 | 10 | 3.97 | 11° | — | |
| RPHT10T3M8EN-SM | 8 | 10 | 3.97 | 11° | — | |
| RPMT10T3M8EN-HR | 8 | 10 | 3.97 | 11° | — | |
| (2) | RPHT1204MOFN-NM | 8 | 12 | 4.76 | 11° | 7811013 |
| RPHW1204MOSN | 8 | 12 | 4.76 | 11° | — | |
| — | ||||||
| RPHT1204MOEN-GL | 8 | 12 | 4.76 | 11° | — | |
| RPHT1204MOEN-GM | 8 | 12 | 4.76 | 11° | — | |
| RPHT1204M8EN-SM | 8 | 12 | 4.76 | 11° | — | |
| RPMT1204M8EN-HR | 8 | 12 | 4.76 | 11° | — | |
| (3) | RPHT1605MOFN-NM | 8 | 16 | 5.56 | 11° | 7811016 |
| RPHW1605MOSN | 8 | 16 | 5.56 | 11° | — | |
| — | ||||||
| RPHT1605MOEN-GL | 8 | 16 | 5.56 | 11° | — | |
| RPHT1605MOEN-SM | 4 | 16 | 5.56 | 11° | — | |
| RPHT1605M8EN-SM | 8 | 16 | 5.56 | 11° | — | |
| Nominal | Coating materials | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| XC3030 | XP3035 | XP2025 | XP2040 | XC1015 | XC5035 | XC5040 | XP6015 | ||
| (1) | RPHT10T3MOFN-NM | — | — | — | — | — | — | — | — |
| RPHW10T3MOSN | 7825017 | — | — | — | — | — | — | — | |
| — | 7814030 | — | — | — | — | — | — | ||
| RPHW10T3MOEN | — | — | — | — | 7812017 | — | — | — | |
| RPHT10T3MOEN-GL | 7825008 | 7814008 | 7826008 | 7813008 | — | — | — | — | |
| RPHT10T3MOEN-GM | 7825009 | 7814009 | — | — | — | — | — | — | |
| RPHT10T3MOEN-SM | — | — | — | — | — | 7815010 | — | — | |
| RPHT10T3M8EN-SM | — | — | — | — | — | 7815050 | 7816050 | — | |
| RPMT10T3M8EN-HR | — | — | — | — | — | — | — | 7824083 | |
| (2) | RPHT1204MOFN-NM | — | — | — | — | — | — | — | — |
| RPHW1204MOSN | 7825018 | — | — | — | 7812018 | — | — | — | |
| — | 7814018 | — | — | — | — | — | — | ||
| RPHT1204MOEN-GL | — | — | 7826011 | 7813011 | — | — | — | — | |
| RPHT1204MOEN-GM | 7825011 | 7814011 | — | — | — | — | — | — | |
| RPHT1204M8EN-SM | — | — | — | — | — | 7815051 | 7816051 | — | |
| RPMT1204M8EN-HR | — | — | — | — | — | — | — | 7824084 | |
| (3) | RPHT1605MOFN-NM | — | — | — | — | — | — | — | — |
| RPHW1605MOSN | 7825019 | — | — | — | 7812019 | — | — | — | |
| — | 7814019 | — | — | — | — | — | — | ||
| RPHT1605MOEN-GL | — | — | 7826014 | 7813014 | — | — | — | — | |
| RPHT1605MOEN-SM | — | — | — | — | — | 7815015 | — | — | |
| RPHT1605M8EN-SM | — | — | — | — | — | 7815052 | 7816052 | — | |
(1) to (3) are equivalent to the compatible insert numbers in the parts table.
Part
Please purchase the wrench separately.