IBOY Square Bottle
Brand :
AS ONE
Caution
- Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.
Product Description
Resin container made of polyethylene (square bottle).
[Features]
· No-seal (no inner plug), yet resistant to liquid leaks.
· Water leak test passed.
· Includes scale marks.
Leak-Proof Square Bottle Container With No Seal
Material: Main unit/lid: PE (polyethylene)
Heat resistant temperature: 110°C
Size Chart Of IBOY Square Bottle
| Part No. | Capacity | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|
| 5-003-01 | 50 mL | 78 | 20 | 55 |
| 5-003-02 | 100 mL | 94 | 20 | 70 |
| 5-003-03 | 250 mL | 118 | 22 | 93 |
| 5-003-04 | 500 mL | 141 | 22 | 116 |
| 5-003-05 | 1 L | 170 | 22 | 146 |
| 5-003-51 | 50 mL | 78 | 20 | 55 |
| 5-003-52 | 100 mL | 94 | 20 | 70 |
| 5-003-53 | 250 mL | 118 | 22 | 93 |
| 5-003-54 | 500 mL | 141 | 22 | 116 |
| 5-003-55 | 1 L | 170 | 22 | 146 |
Dimensional Outline Drawing Of IBOY Square Bottle 5-003-01 to 05
<-01>
<-02>
<-03>
<-04>
<-05>
Measurement Standard
| Product | Product Weight g | Screw Thread Diameter mm | Opening Inside Diameter mm | Lower Ring Diameter mm | Body Diameter mm | Bottle Overall Height mm | Full Water Capacity ml | |
|---|---|---|---|---|---|---|---|---|
| Wide-Mouth Bottle | 50 mL | 9.0 ± 1.0 | 33.0 ± 0.25 | 24.9 ± 0.20 | 34.0 ± 0.25 | 40.0 ± 0.6 | 75.0 ± 0.6 | 70 ± 3.0 |
| 100 mL | 12.0 ± 1.5 | 33.0 ± 0.25 | 24.9 ± 0.20 | 34.0 ± 0.25 | 47.0 ± 0.7 | 96.0 ± 0.7 | 128 ± 5.0 | |
| 250 mL | 26.0 ± 2.0 | 43.6 ± 0.30 | 32.0 ± 0.25 | 44.5 ± 0.30 | 62.0 ± 0.8 | 128.0 ± 0.7 | 305 ± 10.0 | |
| 500 mL | 45.0 ± 3.5 | 54.6 ± 0.30 | 41.9 ± 0.30 | 55.5 ± 0.30 | 76.0 ± 1.0 | 160.0 ± 0.8 | 595 ± 15.0 | |
| 1,000 mL | 70.0 ± 5.0 | 60.6 ± 0.40 | 47.8 ± 0.35 | 61.5 ± 0.40 | 92.0 ± 1.5 | 196.0 ± 1.5 | 1,090 ± 20.0 | |
| 2,000 mL | 140.0 ± 1.0 | 83.6 ± 0.40 | 65.0 ± 0.40 | 84.0 ± 0.50 | 120.0 ± 2.0 | 240.0 ± 3.0 | 2300 ± 50.0 | |
| Narrow-Mouth Bottle | 50 mL | 6.5 ± 0.8 | 20.5 ± 0.25 | 11.0 ± 0.20 | 21.1 ± 0.25 | 40.0 ± 0.6 | 72.0 ± 0.6 | 62 ± 3.0 |
| 100 mL | 14.0 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 47.0 ± 0.7 | 96.0 ± 0.7 | 118 ± 5.0 | |
| 250 mL | 22.0 ± 2.0 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 62.0 ± 0.8 | 129.0 ± 0.7 | 290 ± 10.0 | |
| 500 mL | 42.0 ± 3.5 | 33.0 ± 0.25 | 20.0 ± 0.20 | 33.8 ± 0.25 | 76.0 ± 1.0 | 165.0 ± 0.8 | 565 ± 15.0 | |
| 1,000 mL | 70.0 ± 5.0 | 33.0 ± 0.25 | 20.0 ± 0.20 | 34.0 ± 0.25 | 92.0 ± 1.5 | 202.0 ± 1.5 | 1,080 ± 20.0 | |
| Square Bottle | 50 mL | 13.5 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 35.5 ± 0.6 | 75.0 ± 0.6 | 59 ± 3.0 |
| 100 mL | 15.5 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 42.0 ± 0.7 | 90.0 ± 0.6 | 110 ± 5.0 | |
| 250 mL | 30.0 ± 2.5 | 43.6 ± 0.30 | 32.0 ± 0.25 | 44.5 ± 0.30 | 58.5 ± 0.8 | 114.0 ± 0.7 | 290 ± 10.0 | |
| 500 mL | 64.0 ± 5.0 | 54.6 ± 0.35 | 41.5 ± 0.35 | 55.5 ± 0.35 | 72.0 ± 1.0 | 138.0 ± 1.0 | 580 ± 15.0 | |
| 1,000 mL | 97.8 ± 7.0 | 60.6 ± 0.40 | 48.0 ± 0.40 | 61.5 ± 0.40 | 90.0 ± 1.5 | 167.0 ± 1.5 | 1130 ± 20.0 |
*The dimensional values of the diameter are averages of the parting and right angle directions
*Wide-mouth 2‑L bottles tentatively follow the standard
Leakage Standard
Load the fixed amount of water, tighten the cap with a tightening torque for each product shown in the table below.
Leave it alone upside down, and there should be no leaks reaching the screw threads after 12 hours.
| Wide-Mouth Bottle | Narrow-Mouth Bottle | Square Bottle | |
|---|---|---|---|
| 50 mL | 15 kg.cm | 10 kg.cm | 15 kg.cm |
| 100 mL | 15 kg.cm | 15 kg.cm | 15 kg.cm |
| 250 mL | 20 kg.cm | 20 kg.cm | 20 kg.cm |
| 500 mL | 30 kg.cm | 20 kg.cm | 25 kg.cm |
| 1,000 mL | 40 kg.cm | 25 kg.cm | 30 kg.cm |
| 2,000 mL | 40 kg.cm |