Savina Minimax, Wiping Cloth (10 Pcs. Included)

Brand :

AS ONE

Caution

Product Description

Wiping cloth washed with ultra-pure water, thus meeting standards for Class 100.
[Features]
· Rags for cleanrooms that have excellent water absorption and catch fine particles of dust.
· Since ultrafine fibers are used, there is no fuzz on the surface of the texture and the generation of dust can be inhibited to extremely low levels.
[Applications]
· Wiping work in a cleanroom.

Wiper That Minimizes Dust Generation And Has Excellent Water Absorbency

Can also be used in cleanrooms.

Product Range Of Savina Minimax Wiping Cloth

Part No.	Size (mm)	Quantity	Note / JAN Code
9-3061-01	240 × 240	1 Case (Contains 10 Sheets)	4560274451640

About The Performance Of This Product

Dust-Free

There is no unstable fluff on the surface of the fabric. It also uses strong Belima X ultra-fine fibers to minimize dust generation. Dust-free cleaning, cleanroom packaging. In addition, it is also possible to reuse the product depending on the environment.

Sample: size 24 cm × 24 cm, cleanroom pack.
Measurement method: JIS-B-9923 system Make the sample generate dust using the tumbling method and measure using a light-scattering particle measurement device. Average of three values.
Measurement device: RION KC-15. Printer KP-11.
* The data is for reference.

Particle Diameter	Average Dust Generation
0.3 µm	19
0.5 µm	12
1.0 µm	3
2.0 µm	0
3.0 µm	0
5.0 µm	0

Wipe-Cleaning Properties

This product is made from Belima X high-density ultra-fine fibers and is appropriate even for fine, uneven objects to be wiped. Reliably catches even dust microparticles.

Surface After Use

This product uses ultra-fine fibers, which have a wedge-shaped cross-section, that are a perfect fit to the surface of objects being wiped. Reliably strips away adhered dirt.

Water Absorbency

Synthetic fibers themselves are not normally absorbent, but they exhibit capillary action because of the use of Belima X ultra-fine fibers. This high-density composition captures and holds water.

Water Absorption Rate (sec/cm)		Water Retention Amount (g/m²)
Vertical Direction	Horizontal Dimensions	Water Retention Amount (g/m²)
6	6	230

Water absorption rate: time needed to soak a 2-cm cloth sample 2 cm in water and suck up water up to a height of 1 cm (vertical × horizontal).
Water retention amount: weight increase after soaking the sample in water for 2 minutes, pulling it up and letting it drip for 1 minute.

Chemical Resistance

		Evaluation
Alcohols	Methanol	○
	Ethanol	○
	Isopropanol	○
	Ethylene Glycol	○
Hydrocarbons	Benzene	○
	Toluene	○
	Xylene	○
	n-Hexane	○
Chlorinated Hydrocarbons	Carbon Tetrachloride	○
	Trichloroethylene	○
	Perchloroethylene	○
Others Organic Compounds	Acetone	○
	Dioxane	○
	Tetrahydrofuran	○
	Dimethylformamide	○
	Kerosene	○
	Acetic Acid (Conc.)	×
	Acetic Acid (10%)	○
	Nitric Acid (Conc.)	×
	Nitric Acid (10%)	○
Inorganic Compounds	1 N Sulfuric Acid	○
	0.1 N Sulfuric Acid	○
	1 N Chlorine	○
	0.1 N Chlorine	○
	Aqueous Ammonia (25%)	○
	6 N Caustic Soda	×
	1 N Caustic Soda	×
	0.1 N Caustic Soda	○
	Hydrogen Peroxide (3%)	○
	Hydrogen Peroxide (5%)	○
	Sodium Hypochlorite (0.01%)	○
	Sodium Hypochlorite (0.02%)	○

○: Chemically and physically stable; ×: Cannot be used because it would dissolve.
Measurement method: Submerge at 15°C for 72 hr.

Eluded Components

Unit: mg/sheet

	Inorganic Ions
	Cl^-	NO₂^-	NO₃^-	SO₄^2-
Distilled Water	0.151	0.263	0.047	0.260
Isopropanol	0.153	ND	ND	0.130

	Metal Ions
	Na	K	Ca	Mg	Fe
Distilled Water	0.062	0.026	0.419	0.013	ND
Isopropanol	0.057	ND	ND	ND	ND

ND shows values equal to or less than the detection limit values.
The measurement method is to completely submerge 1 sheet of a 24 cm × 24 cm clean pack product sample in an elution liquid for detection.