Dust Removal Hood

Dust Removal Hood

Standard Unit Price:
-
Days to Ship :
4 Day(s) or more

Basic Specifications

  • Product Type
    Dust draft
  • Size(mm)
    700X500X500
  • Specifications
    Size: (Excluding Protruding Part)
  • Product Name
    Dust Removal Hood JJF-01
  • Manufacturer Model Number
    JJF-01
  • JAN Code
    4560111769617
  • Amount Of Content
    1 unit

Details

Part Number
Amount Of Content

Refine by

  • 1 unit
  • Clear
Days to Ship

Sort By

  • By Fastest Delivery Date
  • By Slowest Delivery Date
  • Clear
Standard Unit Price

Sort By

  • Price: Low to High
  • By Highest Price
  • Clear
Quantity
1 unit
4 Day(s) or more
-

Part Number : 2-7885-01
Days to Ship 4 Day(s) or more
Standard Unit Price -
Quantity 1 unit

Specificationtitle

  • Product Type
    Dust draft
  • Size(mm)
    700X500X500
  • Specifications
    Size: (Excluding Protruding Part)
  • Product Name
    Dust Removal Hood JJF-01
  • Manufacturer Model Number
    JJF-01
  • JAN Code
    4560111769617
  • Material Details
    Cover / Flexible PVC (Vinyl Chloride Resin) Sheet, Frame / Stainless Steel (SUS304) Pipe, Top Board / PVC (Vinyl Chloride Resin)
  • Duct Diameter(φ mm)
    38
  • Features
    Dust removal work can be started just by connecting to the vacuum duct. Because it is surrounded by a hood, it does not scatter dust around it.

Loading...

Searching. Please wait.

Cancel

The product list can be filtered using the selections found beneath the specification item name.

  1. 1

Product Specifications

Hood Capable Of Easily Removing Dust

Allows for easy dust removal just by attaching to the vacuum cleaner duct. Prevents scattering of dust to the surroundings via enclosing in the hood.

Allows for easy dust removal just by attaching to the vacuum cleaner duct. Prevents scattering of dust to the surroundings via enclosing in the hood.

  • Size (excluding protruding parts) 700 × 500 × 500 mm
  • Materials (cover)·- soft PVC (polyvinyl chloride resin) sheet
  • Materials (frame) - stainless-steel (SUS304) pipe
  • Materials (top plate) - PVC (polyvinyl chloride resin)
  • Duct diameter ø38 (diameter 38 mm)

Assembly Method

Assembly Method

1. Assemble the left/right frames. Prepare 8 × 474‑mm stainless-steel pipes, 2 × 2-way joints and 6 × 3-way joints. Pound in each pipe into the joint with a hammer, etc., referring to the diagram on the left.
At this point, make sure that the 3-way joints are facing each other such that they will go to the same positions.

2. Once the left/right frames are assembled, connect the left/right frames with 3 × 674‑mm stainless-steel pipes. With this, the main body is complete.

3. Place the top plate at around the center of the completed main body frame.

4. Cover with the vinyl curtain.

5. There is no hole in the top surface of the curtain, so cut one open with a box cutter, etc. as needed.

○: For the corner joint, pound the pipe all the way in so there is no gap. If it is not sufficiently pounded down, the main body frame may be shaky and other issues may occur.
×: If there are several millimeters of insertion gap left over, it may be difficult, but use a hammer, etc. to pound the corner joint down firmly all the way in.


Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)