Set Item Ceramic Block Gauge 0 Grade Equivalent Product

Set Item Ceramic Block Gauge 0 Grade Equivalent Product

With no rusting, management of the JIS Grade 0 equivalent block gauge is extremely simple.
[Features]
· With no rusting, management is easy and cost performance is excellent.
· Burring does not occur easily, even if the measurement surface is scratched.
· With no rusting, it can be handled with bare hands, and anti-rust processing is not required even after use in damp places.
· Burring does not occur easily, even if the measurement surface is scratched.
· Higher wear resistance than steel, for long service life with no changes over time.
[Applications]
· A block gauge set for precise inspection and adjustment of length measuring instruments.

PDF

What is block gauge

To define an object’s length with the the surface between end face of the
block gauge. This is a commonly used standard tool.
A gauge high in precision and it’s the meter standard to other measuring
tools in the industrial use.
The material varies from steel, ceramic and sizes from 0.5mm to 1000mm.
Precision varies from four types, which are level K, level 0, level 1 and level 2.
 
LevelUsages
KFor ultra-precision
Measurement
To confirm standard block gauge • For precision
academic research
0For precision
measurement
To check the block gauges of working and inspection
use • inspect the precision of measuring tools
1For standard
measurement
To inspect precision of the gauge • inspect parts of
the machine
2For working
measurement
To adjust precision of measuring tools • 
install the tools and cutlery


Assemble block gauge (linking)

01
First, cross pile up
tightly together.
02
Slightly turn the two tight
combined block gauges
to the same direction.
03
Ensure that it links
together tightly.
 
Block gauge can be linked together tightly and combined into any desired
length. For bigger size block gauge, take two block gauges, set it at
cross-shape and turn it to so the measuring face links together.
For bigger size and smaller size block gauge to link together, pile up the
measuring face and slightly slide it back and forth for tight linking. The same
procedures should be followed for smaller size block gauge linking.
Main points of linking To avoid accumulative amount of block gauge’s margin tolerance,
use only minimum amount of block gauge when linking.
Note the average temperature after block gauge linking.

Store and use precautions

  • Ensure both sides of block gauge are clean without any burrs. (Use optical flat for checking is recommended.)
  • Apply anti-rust oil for storing and keep it at a place with small changes in humidity and temperature.
Part Number
BC-032
BC-047
Part NumberVolume DiscountDays to ShipNominal Dimension
(mm)
Number of Pairs
(Each Pair)
Items cord Mass
(g)
Set Content Features
2 Day(s) or more 1 ~ 50321507709501.005×1/1.01・1.02・・・1.09(0.01)×9/1.1・1.2・・・1.9(0.1)×9/1・2・3・・・9(1)×9/10・20・30(10)×3/50×1Does not change due to aging. Iron powder, etc., will not stick.
2 Day(s) or more 1 ~ 1004715077122501.005×1/1.01・1.02・・・1.09(0.01)×9/1.1・1.2・・・1.9(0.1)×9/1・2・3・・・24(1)×24/25・50・75・100(25)×4Does not change due to aging. Iron powder, etc., will not stick.

Loading...

  1. 1
 

Basic Information

Single Item / Set Set Material Ceramic

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)