Hotplate (Chemical Resistant Plate)
Caution
Product Description
[Features]
・ Chemical resistant top plate series with ceramic coating on the top plate
・ A manual return type bimetal is used to prevent overheating
・ It heats according to the target set temperature
・ Maximum temperature is 300°C
・ Stable temperature control is possible by PID control
·Three types of timer operation are possible in 1 minute increments from 1 minute to 99 hours 59 minutes.
[Applications]
・ Research and development, etc.
Chemical-Resistant Hot Plate With Ceramic Coated Metal Top Plate Specifications
Utilizes a manual reset type bimetal for overheat prevention.
Stable temperature control is possible with the PID control, allowing for heating up to a desired configured temperature.
Has a timer with a device shutdown function for up to 99 hours, 59 minutes at 1‑minute increments, and allows for 3 types of timer operations.
- Main body material: stainless steel (SUS304, bottom plate only SUS430)
- Top plate material: ceramic-coated aluminum
- Outer dimensions (excluding protrusions): 440 × 347 × 123 mm
- Plate size: 400 × 300 mm
- Heater capacity: mica heater 1,400 W
- Temperature regulator: PID control
- Maximum temperature: 300°C
- Temperature regulator timer: 0 to 99 hours and 59 minutes (with device shutdown function)
- Safety devices: overcurrent protection / overheating prevention
- Power supply: 100 VAC 50/60 Hz
- Power cord: 2.5 m (3P plug with grounding)
- Weight: 11 kg
- Load-bearing capacity: 10 kg
Control Panel Functionality
- 1.Actual temperature display (PV): displays current hot plate temperature. Displays function settings when timer is set.
- 2.Set temperature display (SV): displays set temperature / timer set time. The timer set value indicates the set time. When the set time is displayed, “1.02” indicates 1 hour and 02 minutes.
- 3.Timer mode key: used in selecting a function when using the timer.
- 4.DOWN key: used to reduce the number displayed in the set value display.
- 5.UP key: used to increase the number displayed in the set value display.
- 6.Timer start key: used to start/stop timer operation.
- 7.Heater lamp: lights up when outputting to heater.
- 8.Timer lamp: flashes during timer counting, lights up when counting up.