Hotplate Heater, Capacity 80 W × 2
Brand :
AS ONE
Caution
Product Description
Low profile, stable-type hotplate.
[Features]
· Has a wide stage, and can be used for multiple purposes.
· Lightweight and easy to carry around.
· Plate is made of stainless steel (SUS304).
· Maximum temperature is 80°C.
· PID temperature control method.
[Applications]
· For research and development.
Stable And Lightweight Hot Plate With Low Profile
Specifications
Plate materials: stainless steel (SUS304)
Heater capacity: 80 W × 2
Temperature control method: PID control
Temperature distribution width: 0.5 (at 37℃) to ± 1.4℃ (at 60℃)
Power supply: 100 V AC 50/60 Hz 2 A
Power cord length: 1.8 m (3P plug)
Load bearing capacity: approx. 5 kg
Size: 450 × 300 × 75 mm
Weight: 3.9 kg
| Part No. | Model Number | Max. Operating Temperature (℃) | Plate Size (mm) |
|---|---|---|---|
| 1-914-11 | HP-4530N | 80 | 450 × 300 |
Safety Precautions
- This model is not explosion-proof. Do use in environments with flammable or explosive gases under any circumstances.
- Connect to an outlet that has a power supply of 100 V AC and 2 A or higher. Always connect to the ground, even when the outlet does not support 3 prongs. There is a risk of fire due to overcurrent caused by a loose plug, and other accidents, when using a connection adapter, so avoid using them.
- Do not use while the power cord is bundled up. This may cause heating or fire.
- Place on a level surface, leaving 15 cm of air space along the sides and back surface.
- Take care not to burn yourself by touching the plate with your hand.
- Do not scratch the plate. If the plate is dirty, wipe down with a soft, damp cloth.
- Make sure not to wet the main device. Corrosion may lead to failure of electrical components, and in particular, short circuits.
- If used outside its intended operating environment range, this may cause a malfunction or failure.
- When not in use, always unplug and store the power cord.
- If you start to hear thunder, immediately flip the power supply switch and cut the source power supply.
- Do not disassemble or modify. This may result in a short circuit, electrical shock, malfunction, fire or other accident.