Square Glass Plate
Caution
- Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.
Product Description
Glass board that can be ordered in various dimensions, starting from one piece.
[Features]
· Excellent thermal shock resistance, low thermal expansion, excellent heat resistance and impact resistance in all fields.
· Glass plate with high degree of light transmittance and little optical distortion.
Glass Plate With Excellent Heat And Shock Resistance
· Excellent heat and shock resistance and low heat expansion, so it exhibits excellent heat and shock resistance in every field.
· Sheet with material for experiments that has the properties of high optical transparency and low optical distortion.
· Maximum operating temperature: TEMPAX/490°C
· Normal operating temperature: TEMPAX/230°C
· Cut tolerance: Outer dimensions ± 0.5 mm (standard product)
· End face: Chamfered finish
Specifications Table
Cuttable Dimensions (□<50 mm)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.1 |
| Width (W) | 1 to 50 | ||
| Length (L) |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (□50 mm or more)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.2 |
| Width (W) | 50 to 300 | ||
| Length (L) |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (<ø50 mm)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.1 |
| Outer Diameter (ø) | 1 to 50 |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (ø50 mm or more)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.2 |
| Outer Diameter (ø) | 50 to 300 |
*There may be cases where cutting is not possible due to the combination of the width and length.