• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

WIDIN 4-flute, Right Angle Sander EM

WIDIN 4-flute, Right Angle Sander EM

[Features]
· The pin angle blade shape that emphasizes sharpness and TiAlN coating with high lubricity support machining of soft materials and aluminum alloys.
· Uses low cost 600MG-K materials.

Part Number

Configured Part Number is shown.

Part Number
ZE304020
ZE304025
ZE304030
ZE304035
ZE304040
ZE304045
ZE304050
ZE304055
ZE304060
ZE304065
ZE304070
ZE304075
ZE304080
ZE304085
ZE304090
ZE304095
ZE304100
ZE304105
ZE304110
ZE304115
ZE304120
ZE304130
ZE304140
ZE304150
ZE304160
ZE304180
ZE304200
Part NumberVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Blade diameter tolerance Shank tolerance
4 Day(s) or more 266400~-0.02(mm)h6
4 Day(s) or more 2.586400~-0.02(mm)h6
4 Day(s) or more 386450~-0.02(mm)h6
4 Day(s) or more 3.5106450~-0.02(mm)h6
4 Day(s) or more 4116450~-0.02(mm)h6
4 Day(s) or more 4.5116450~-0.02(mm)h6
4 Day(s) or more 5136500~-0.02(mm)h6
4 Day(s) or more 5.5136500~-0.02(mm)h6
4 Day(s) or more 6136500~-0.02(mm)h6
33 Day(s) or more 6.5168600~-0.02(mm)h6
4 Day(s) or more 7168600~-0.02(mm)h6
4 Day(s) or more 7.5168600~-0.02(mm)h6
4 Day(s) or more 8198600~-0.02(mm)h6
4 Day(s) or more 8.51910700~-0.02(mm)h6
4 Day(s) or more 91910700~-0.02(mm)h6
4 Day(s) or more 9.51910700~-0.02(mm)h6
4 Day(s) or more 102210700~-0.02(mm)h6
4 Day(s) or more 10.52212750~-0.02(mm)h6
33 Day(s) or more 112212750~-0.02(mm)h6
4 Day(s) or more 11.52212750~-0.02(mm)h6
5 Day(s) or more 122612750~-0.02(mm)h6
4 Day(s) or more 132612800~-0.02(mm)h6
33 Day(s) or more 142614800~-0.02(mm)h6
33 Day(s) or more 153216900~-0.02(mm)h6
33 Day(s) or more 163216900~-0.02(mm)h6
4 Day(s) or more 1832181000~-0.02(mm)h6
4 Day(s) or more 2038201000~-0.02(mm)h6

Loading...

  1. 1

Basic Information

Work material General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum Number of flutes(sheet) 4 Type Square
Coating TiAlN Machining Application Side / Groove / Plunging (Z feed) Blade tip shape Sharp Edge
Torsion Angle (θ) Standard torsion (30-40°) Torsion Angle details(°) 30

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7960 8499 / FAX:(60) 3 7960 7499
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)