Sensor Terminals - Terminal Blocks for machinery & electrical control | MISUMI Malaysia
Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed.
More details here.
The sensor terminal is a terminal block for connecting a sensor. It is divided into a two-wire system and a three-wire system. The three-wire system consists of a power supply terminal block, signal terminal block, and MIL standard connectors. The operation of the terminal block can be checked visually by blinking LED, and some products are color-coded according to the output method and the type of power supply. The connection method to the terminal block can be selected from screw type and screwless type. There are many types that can be easily connected, such as those that use push-in connection and those that can be connected only with a screwdriver, and are easy to install on a DIN rail. Products equipped with an e-CON connector, which is standardized as a sensor connector, do not require the work of stripping the coating of the cables. Since the number of contacts and the pitch between terminals vary depending on the model, select as required.