More than 7 Million Products, 1,300 Brands. Free Shipping.
25,000 Stock items for Same Day Ship Out.
25,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- Connectors
- Wires/Cables
- Crimp Terminals
- Cables by Application
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Personal Computers / AV Cables
- LAN/Network Cables
- Cables with Connectors
- RS232C Cables
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 22:30 20/9 to 7:00 21/9, 9:00 23/9 to 5:00 (MYT) 24/9/2018. We apologize for the inconvenience.
Screw-Hole-Related Tools
An online store for screw hole related tools. In MISUMI's e-catalog, specifications/dimensions of nominal, pitch, screw type, delivery date, etc. can be selected with one click, so you can easily find the desired screw hole related tools
[What are screw hole related tools?]
Tools for cutting male threads, female threads, or fixing/removing screw threads. Depending on the shape of the groove, it is divided into categories such as triangular thread, square thread, trapezoidal thread, saw tooth screw, round thread, ball screw, and "triangular screw" which is the fastening screw most commonly used. Triangular threads can be divided into three types: "metric thread", "inch thread", and "pipe thread", with standards of "ISO (JIS) thread", "unified thread" and "Whitworth thread".
[What are screw hole related tools?]
Tools for cutting male threads, female threads, or fixing/removing screw threads. Depending on the shape of the groove, it is divided into categories such as triangular thread, square thread, trapezoidal thread, saw tooth screw, round thread, ball screw, and "triangular screw" which is the fastening screw most commonly used. Triangular threads can be divided into three types: "metric thread", "inch thread", and "pipe thread", with standards of "ISO (JIS) thread", "unified thread" and "Whitworth thread".
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Days to Ship: 3 Day(s) or more -
Days to Ship: 1 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Tapered Tap Series for American Piping General Use (NPSF) SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: 5 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
YAMAWA MFG
Cutting tap with a straight groove out of consideration for cutting chip storage.
Select among metric screws, unify screws, machine screws, etc., to suit the application.
[Features] It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
· "Starter tap", "middle tap", and "finishing tap" sets are available depending on the number of teeth in the tapped bite section.Days to Ship: 1 Day(s) or more -
Spiral Tap Series, for Stainless Steel, Long Shank EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Days to Ship: 3 Day(s) or more -
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: 3 Day(s) or more -
Point Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: 3 Day(s) or more -
Days to Ship: 1 Day(s) or more -
Grooveless Tap Series X Performer S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.Days to Ship: 3 Day(s) or more -
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Days to Ship: 3 Day(s) or more -
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
Limited special price is available for the standard sizes
- Volume Discount
Days to Ship: 1 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Days to Ship: 1 Day(s) or more -
Model A Tap Series, Long Shank Point Tap A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: 3 Day(s) or more -
ESCO
【Product Specifications】
・Drill Size …Dia 2.5・3.3・4.2・5.0・6.8・8.5・10.2mm
・Tap Size …M3×0.5・M4×0.7・M5×0.8・M6×1.0・M8×1.25・M10×1.5・M12×1.75
・Material …Drill ：HSS 、3-Way Tap ：Alloy Steel
・3-Way Tap With HandleDays to Ship: 3 Day(s) or more -
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Days to Ship: 1 Day(s) or more -
Tap Series for Insert Screw Hand Tap Long Shank HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 2 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Hand Tap Series For Stainless Steel EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Days to Ship: 3 Day(s) or more -
Planet Cutter Series NC Planet Cutter WX-PNC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: 3 Day(s) or more -
Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: 4 Day(s) or more -
Point Tap Series For General Use EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Days to Ship: 3 Day(s) or more -
Grooveless Tap Series VP New Roll VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
General Purpose Spiral Tap (for Metric Threads)
OSG
[Features]
· Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
[Applications]
· For blind hole machining.
· Work materials: Carbon steel, alloy steel, nonferrous metal.
[Material]
· High-Speed Steel (HSS-E)Days to Ship: 3 Day(s) or more -
General Purpose Hand Tap Set (SKS for Metric Threads)
OSG
[Features]
· A common tap that's used in various applications.
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: Medium carbon steel, aluminum alloy, etc.Days to Ship: 3 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | SKC | TRUSCO NAKAYAMA | SKC | OSG | TRUSCO NAKAYAMA | SKC | OSG | YAMAWA MFG | OSG | OSG | OSG | TRUSCO NAKAYAMA | OSG | OSG | SKC | YAMAWA MFG | MISUMI | SKC | YAMAWA MFG | OSG | ESCO | MISUMI | OSG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | SKC | ISHIHASHI | HOZAN | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG | OSG | OSG |
| Product Series | Tapered Tap Series for American Piping General Use (NPSF) SPT | Spiral Tap Series, for Stainless Steel, Long Shank EX-LT-SUS-SFT | Tapered Tap Series for American Piping General Use (NPT) TPT | Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】 | Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC | Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX/HC-SP-OX | |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more |
| Screw Types | Meter | Meter / unified / Whitworth / Sewing Machine | Meter | Meter | Meter / Whitworth | Parallel for Pipes | - | Meter | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Sewing Machine | Meter | Meter / Whitworth | Meter | - | Meter | Taper for Pipe | Other | Meter / Whitworth | Meter | - | Meter / unified / Whitworth / Sewing Machine | Meter | - | Meter | Meter / unified | - | - | Meter | - | Meter | Meter | Meter | Meter | Meter | Meter / unified / Taper for Pipe | Meter | Meter / unified / Whitworth / Sewing Machine | Meter / unified | - | Whitworth | Meter | Miniature | Meter | Meter | Meter |
| Screw size (Nominal) | M1 ～ M30 | No.0-80UNF ～ M30 | M2 ～ M120 | M3 ～ M16 | W1/2 ～ M12 | NPS1 ～ NPS3/8 | M3～10 ～ M5～13 | M1 ～ M100 | No0UN ～ M100 | No.0-80UNF ～ M30 | M3 ～ M24 | W1 ～ M36 | M1.4 ～ M42 | M1～6 ～ M25～70 | M1 ～ M45 | NPT1 ～ NPT4 | PG7 ～ PG42 | 1/2W12 ～ M30 | M3 ～ M10 | W1 ～ W75 | No.1-64UNC ～ M48 | M2 ～ M24 | - | M2 ～ M24 | 1/2UN ～ No12UN | - | - | M2 ～ M22 | - | - | M2 ～ M30 | M3 ～ M24 | M1.4 ～ M24 | M2 ～ M30 | - | - | No0UN ～ M48 | M1 ～ M12 | M1～6 ～ M42～120 | W1 ～ W15/16 | M6 ～ M33 | S0.6 ～ S0.9 | M3 ～ M16 | M2.0 ～ M24.0 | M2.0 ～ M6.0 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 3.5 | 0.25 ～ 3.5 | 0.25 ～ 4 | 0.5 ～ 2 | 0.45 ～ 40 | 11.5 ～ 27 | - | 0.25 ～ 6 | 0.25 ～ 80 | 0.2 ～ 3.5 | 0.5 ～ 3 | 0.4 ～ 20 | 0.3 ～ 4.5 | - | 0.2 ～ 4.5 | 8 ～ 27 | 16 ～ 20 | 0.5 ～ 3 | 0.5 ～ 1.5 | 8 ～ 40 | 0.25 ～ 4 | 0.25 ～ 3 | - | 0.4 ～ 3 | 0.5 ～ 40 | - | - | 0.25 ～ 1.5 | - | - | 0.4 ～ 3.5 | 0.5 ～ 3 | 0.3 ～ 3 | 0.4 ～ 3.5 | 1 ～ 28 | 0.5 ～ 3 | 0.25 ～ 80 | 0.25 ～ 56 | - | 3 1/2 ～ 60 | 0.75 ～ 2 | 0.15 ～ 0.225 | 0.5 ～ 2 | 0.4 ～ 3 | 0.4 ～ 1 |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 5P | 1.5P ～ 9P | - | 5P | 4P | - | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P ～ 9P | 2.5P | 2.5P | 5P | - | 2P ～ 4P | 2.5P | - | 2.5P | 1.5 P ～ 9 P | 1.5P ～ 9P | 2.5P | 5P | - | 5 P | 1.5P ～ 5P | - | - | - | - | - | 2.5P | 1.5P ～ 5P | 5P | 1.5P ～ 5P | - | - | 5P | 2P ～ 4P | - | 1.5P ～ 9P | - | 2P | 2.5P | 2.5 | - |
| Tool Material Type | High-speed steel | High-speed steel | - | High-speed steel | - | High-speed steel | - | - | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | High-speed steel | Powder high-speed steel | - | Cobalt HSS | High-speed steel | - | - | - | - | High-speed steel | Alloy HSS | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | - | - | - | High-speed steel | High-speed steel | - | - |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - |
| Tap Type | Hand Tap | Point tap | Hand Tap | Hand Tap | Hand Tap | Tap for pipes | Tap wrench | Hand Tap | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Point tap | Tap wrench | Roll tap | Tap for pipes | Tap for pipes | Spiral Tap | Hand Tap | Hand Tap | Spiral Tap | Point tap | - | Point tap | Hand Tap | Modification/removal Tool | Modification/removal Tool | Die | Thread-cutting-related tool | Tap wrench | Spiral Tap | Hand Tap | Point tap | Hand Tap | Thread cutter | Thread cutter | Point tap | Roll tap | Tap wrench | Hand Tap | Point tap | Roll tap | Spiral Tap | - | - |
| Hole type | For through hole / For blind hole | For through hole | - | For through hole / For blind hole | - | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | - | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | - | For blind hole | For through hole | - | For through hole | For through hole / For blind hole | - | - | - | - | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | - | - | - | For blind hole | For blind hole | - | - |
| Coating Y/N | NA | NA | - | NA | - | NA | - | - | NA | NA | NA | NA | Available | - | Available | NA | - | NA | NA | - | NA | Available | - | NA | NA | - | - | - | NA | NA | Available | NA | NA | NA | Available | Available | NA | Available | - | - | - | NA | NA | - | - |
| Coating Type | - | - | - | Non-Coated | - | Non-Coated | - | - | Non-Coated | - | Non-Coated | Non-Coated | TiN | - | TiCN | Non-Coated | - | - | - | - | - | Other | - | Non-Coated | Non-Coated | - | - | - | Non-Coated | - | - | - | - | Non-Coated | TiAlN | TiAlN | Non-Coated | TiCN | - | - | - | - | - | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 36 ～ 135 | 36 ～ 195 | - | 46 ～ 95 | - | 55 ～ 110 | 85 ～ 315 | 30 ～ 225 | 30 ～ 275 | 36 ～ 135 | 100 ～ 200 | 80 ～ 300 | 34 ～ 175 | 170 ～ 1250 | 30 ～ 220 | 55 ～ 170 | 85 ～ 135 | 46 ～ 135 | 46 ～ 75 | - | 36 ～ 195 | 80 ～ 200 | - | 40 ～ 120 | 100 ～ 150 | - | - | - | - | 80 | 40 ～ 135 | 46 ～ 120 | 34 ～ 120 | 40 ～ 135 | 60 ～ 120 | 60 ～ 120 | 30 ～ 185 | 30 ～ 82 | 100 ～ 1480 | 36 ～ 250 | - | 36 | 46 ～ 95 | 40 ～ 120 | - |
Loading...
Configure
Specification/Dimensions
-
Screw Types
-
Screw size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No0UN
- No.0-80UNF
- NO.10
- No.10
- S0.1
- No.1-72UNF
- No.1-64UNC
- No.10-32UNF
- No.10-24UNC
- No.12-32UNEF
- No.12-28UNF
- No.12-24UNC
- NO.2
- S0.2
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- S0.3
- No.3-56UNF
- No.3-48UNC
- NO.4
- No.4
- S0.4
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- NO.6
- No.6
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- BC1
- G1
- G1PF
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1´-20UNEF
- 1'-14UNF
- 1'-14UNS
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11.5
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11.5
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4U
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11.5
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-14UNEF
- 1'1/8-12UNF
- 1′1/8-11
- 1 1/8-8UN
- 1'1/8-7UNC
- 1´ 1/8-7UNC
- 1'1/8W7
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- PS1/4-19
- 1/4-18
- 1/4W20
- 1/4SM24
- 1/4SM40
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1'7/8W4.5
- 1'8UNC
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM40
- 1/8W40
- 1/8SM44
- M1～10
- 1´11.5
- 1'12UNF
- 1'14UNS
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- 1/16SM80
- 1'20UNEF
- M1.1
- M1.2
- S1.2
- BC1.37
- M1.4
- S1.4
- M1.5
- M1.6
- M1.7
- M1.8
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2´-11.5
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2´1/2-11
- 2′1/2-11
- 2´1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- 2′1/4-11
- W2"1/8
- 2"3/4UN
- R2"3/4
- W2"3/4
- W2"3/8
- 2'4.5UNC
- 2'W4.5
- M2～4.5
- W2"7/8
- M2～8
- M2～10
- 2'12UN
- M2.2
- M2.3
- M2.5
- M2.6
- 3UN
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3´-11
- 3′-11
- 3´-8
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3´1/2-11
- 3′1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3~8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16UN
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- SM3/32
- W3/32
- 3/32SM56
- 3/32SM100
- M3.5
- 4M
- 4UN
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- 4´-11
- 4′-11
- 4M0.75
- W4"1/2
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- 5M
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5/32W32
- 5/64SM64
- M5.5
- 6UN
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- No6-40UNF
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-20UNEF
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32UN
- SM7/32
- W7/32
- 7/32W24
- 7/32SM32
- M7.5
- 8UN
- CTV8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- M8~12
- M8.5
- M9
- PG9
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-24UNEF
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- M11
- PG11
- W11
- W11/16
- SM11/32
- SM11/64
- 11/64SM40
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- M15
- W15
- W15/16
- SM15/64
- 15/64SM28
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- M22
- M22.0
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- TM24
- TW24
- W24
- M25
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- M32
- TM32
- W32
- M33
- M33.0
- W33
- M34
- W34
- M35
- W35
- M36
- M36.0
- PG36
- TM36
- W36
- M37
- M38
- W38
- M39
- M39.0
- W39
- M40
- TM40
- W40
- M42.0
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45.0
- M45
- W45
- M46
- M48
- M48.0
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.34
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.5-2
- 1.75
- 2
- 2.5
- 2.52
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- ESCO (580)
- OSG (248)
- YAMAWA MFG (173)
- SKC (64)
- TRUSCO NAKAYAMA (61)
- ISHIHASHI (36)
- NACHI(FUJIKOSHI) (23)
- KUKKO (10)
- TANOI MFG (10)
- GUHRING (8)
- SANDVIK (8)
- DC SWISS (7)
- H & H (7)
- RENNSTEIG (7)
- ONISHI MANUFACTURING (5)
- HOZAN (4)
- SK 11 (3)
- EIKOSHA (2)
- LIGHTSEIKI (2)
- RUKO (2)
- SMATO (2)
- ENGINEER (1)
- KANETEC (1)
- KO-KEN TOOL (1)
- NIIGATA SEIKI (SK) (1)
- NS TOOL (1)
- NEW STRONG (1)
- TSUBOSAN (1)
- TOP (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
MISUMI
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy