Straight Scale Rulers

• 

  Straight Edge: Angle Ruler (with Stopper)

  SHINWASOKUTEI

  A ruler which can measure not only length but also depth or steps.
  [Features]
  · JIS1 Grade.
  · With red numerals.
  · With a silver stopper.
  [Applications]
  · Ideal for measuring length, depth, or steps.
  [Specifications]
  · Stopper Thickness: 5mm, Width: 22mm (for 15cm)
  · Stopper Thickness: 6mm, Width: 35mm (for 30cm)

  Days to Ship:	1 Day(s)

• 

  Straight Edge: Angle Ruler

  SHINWASOKUTEI

  Silver-coated ruler which suppresses surface reflection for easily readable scale.
  [Features]
  · JIS Class 1 with an extensive range of sizes (15 cm to 2 m are available).
  · An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions.
  [Applications]
  · Ideal for measuring length.

  Days to Ship:	1 Day(s) or more

• 

  Linear Scale

  MISUMI

  An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]

  Days to Ship:	3 Day(s) or more

• 

  Stainless Steel Straight Edge

  SHINWASOKUTEI

  A standard ruler to measure length.
  [Features]
  · JIS Class 1 with an extensive range of sizes from 15 cm to 2 m.
  · Stainless steel material used in its original form.
  · Inch conversion table on back surface (15 cm to 1 m, no longer than 1.5 m)
  [Applications]
  · Ideal for measuring the length of straight lines.

  Days to Ship:	1 Day(s) or more

• 

  Straight Edge: Angle Ruler

  TRUSCO NAKAYAMA

  [Features]
  · Scale is easy to see as it is blast finished which limits light reflection.
  · Etched scale so it is unlikely to fade.
  · Imperial conversion table and screw pilot hole diameter table included.
  · JIS Class 1 rated product. (TSU15N to TSU200N)
  [Applications]
  · For delineation, scribing procedures, and dimension measurement.

  Days to Ship:	1 Day(s) or more

• 

  Stainless Steel Straight Ruler EA720YC-100A

  ESCO

  【Product Specifications】
  ・Stainless steel
  ・Millimeter display
  ・Scale x Width x Thickness…1,000 x 30 x 1.0mm

  Days to Ship:	4 Day(s) or more

• 

  Pick Up Scale

  TRUSCO NAKAYAMA

  [Features]
  · Since the tip is bent, it is easy to pinch objects.
  · Imperial conversion table included.
  · JIS Class 1 rated product.
  [Applications]
  · For delineation, scribing procedures, and dimension measurement.

  Days to Ship:	3 Day(s) or more

• 

  Steel Tape Measure with Adhesive Tape EA720JR-2

  ESCO

  【Product Specifications】
  ・Steel tape with adhesive tape
  ・Tape width-13mm
  ・Thickness-0.3mm (including adhesive tape)
  ・This can be pasted on any location.
  ・Length…2m

  Days to Ship:	4 Day(s) or more

• 

  Steel Tape Measure with Adhesive Tape EA720JR-5

  ESCO

  【Product Specifications】
  ・Steel tape with adhesive tape
  ・Tape width-13mm
  ・Thickness-0.3mm (including adhesive tape)
  ・This can be pasted on any location.
  ・Length…5m

  Days to Ship:	4 Day(s) or more

• 

  [Hardened Stainless Steel] Workshop Ruler EA720YK-72

  ESCO

  【Product Specifications】
  ・Material-Hardened stainless steel (INOX)
  ・With wooden case
  ・Millimeter scales
  ・Length x Width x Thickness (mm)…1,000 x 40 x 8
  ・Straightness (μm)…60

  Days to Ship:	3 Day(s) or more

• 

  Cast Iron Ruler Silver cm Display

  SHINWASOKUTEI

  [Features]
  · Used when manufacturing wooden forms or dies for cast metal, and when measuring die dimensions.
  When casting, molten cast iron is poured into sand depressions to harden. The mold is made slightly larger as it expands and contracts at this stage.
  The contraction percentage varies depending on the metal, size, and casting factory, so the appropriate casting measure for the expansion percentage is necessary.
  · Silver processing suppresses the surface reflection to make the scale easy to read.
  [Specifications]
  · Material: Stainless Steel

  Days to Ship:	3 Day(s) or more

• 

  [Hardened Stainless Steel] Straight Edge EA720YK-36

  ESCO

  【Product Specifications】
  ・Material-Hardened stainless steel (INOX)
  ・With wooden case
  ・Length x Width x Thickness (mm)…2,000 x 80 x 15
  ・Straightness (μm)…22

  Days to Ship:	4 Day(s) or more

• 

  Nobisuke 3x Magnification Measure 2-Direction Type Combination Scale

  SHINWASOKUTEI

  [Features]
  · Expands to 3 times the length and can be read close by.
  · Long distances can be easily measured even with just one person.
  · The stopper is plastic and will not damage the contacting areas.
  · Large, easily readable scale numbers are adopted.
  · As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.
  · For interior work, interior construction, fitting installation, front construction, step mounting, block piling, waterworks, stonework, etc.
  · A, AB types: For inner dimension measurement of areas with closet storage space, floor cupboards, and crown molding.
  · B/C/D/E types: For foot measures and span rods (shaku and ken measurements).

  Days to Ship:	3 Day(s) or more

• 

  Aluminum Ruler

  SHINWASOKUTEI

  A ruler used for measuring length or as a cutting or grooving ruler.
  [Features]
  · Lightweight and sturdy ruler which does not rust.
  · It uses large, vivid scale numerals.
  · The anti-slip type has a sponge on the back, allowing the ruler to be held down with light force.
  [Applications]
  · For measuring length, grooving, or cutting.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cut Scale, Fast Level Graduations

  NIIGATA SEIKI (SK)

  Days to Ship:	3 Day(s) or more

• 

  Stainless Steel Scale Comfortable Stage Gradations

  NIIGATA SEIKI (SK)

  [Features]
  · A newly designed step scale that prevents misreading in millimeters.

  Days to Ship:	3 Day(s) or more

• 

  Pick Up Scale Silver

  SHINWASOKUTEI

  [Features]
  · JIS Grade 1 (15 cm – 1 m)
  · The basic performance is unchanged, with the tip of the scale bent, to make grasping easier
  · Large, easily readable numbers are adopted
  [Specifications]
  · Weights and measures conversion table on back surface.
  · Scale: Upper/lower 1 mm pitch

  Days to Ship:	1 Day(s) or more

• 

  Scale Stopped

  TOEIKOGYO

  [Features]
  · Scale can be read in 0.1 mm increments and is equipped with a Vernier stopper.
  · 0.1 mm scale vernier stopper added to JIS Class 1 scale.
  · 0.4 mm Vernier scale reduces reading errors due to parallax.
  · A steel plate spring is built into the stopper to keep the scale from wobbling.
  · Used together with a narrow point scribe needle, it can be used instead of a high gauge.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cutter Ruler, Cut Master EX

  SHINWASOKUTEI

  The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.

  Days to Ship:	3 Day(s) or more

• 

  Straight Edge: Angle Ruler, 1 mm Vertical Pitch

  SHINWASOKUTEI

  [Features]
  · JIS1 Grade.
  · Inch conversion table on back surface.
  · Scale: Upper/lower 1 mm pitch.
  · A 1 mm pitch, easy to read when fine scales are not necessary.

  Days to Ship:	1 Day(s) or more

• 

  Fiber Folding Measure

  SHINWASOKUTEI

  [Features]
  · Structure is filled with glass fiber, so it is light, doesn't rust, and doesn't conduct electricity.
  · Large easy to read numbers.
  · It has excellent workability since it clicks into place at 90°/180°.
  · It is resistant to water and the scale is also durable.
  · A foldable type convenient for carrying

  Days to Ship:	2 Day(s) or more

• 

  Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate)

  SHINWASOKUTEI

  Silver processing suppresses the surface reflection to make the scale easy to read. An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions. Uses Japanese high grade materials.

  Days to Ship:	17 Day(s) or more

• 

  Straight Ruler (Stainless Steel) EA720YD-215

  ESCO

  【Product Specifications】
  ・Millimeter indication
  ・Scale-150mm
  ・Width-15mm
  ・Thickness-0.5mm
  ・Material-Stainless steel
  ・Tip of scale is bent for holding it easily.

  Days to Ship:	4 Day(s) or more

• 

  Steel Straight Ruler EA720YE-300

  ESCO

  【Product Specifications】
  ・One division-0.5mm
  ・Hardened steel
  ・Case-EA720YF-1 (for 150)
  ・Scale x Width x Thickness…300 x 25.4 x 1.2mm

  Days to Ship:	4 Day(s) or more

• 

  [Steel] Precision Straight Edge EA720YK-13

  ESCO

  【Product Specifications】
  ・Material-Steel
  ・With wooden box (except -16 and -17)
  ・Length x Width x Thickness (mm)…1,000 x 60 x 12
  ・Straightness (μm)…12

  Days to Ship:	4 Day(s) or more

• 

  Steel Straight Rule (With Scale) EA720YK-22

  ESCO

  【Product Specifications】
  ・One division-1mm
  ・Scale x Width x Thickness…1,000 x 30 x 6mm

  Days to Ship:	4 Day(s) or more

• 

  [Hardened Stainless Steel] Workshop Ruler EA720YK-71

  ESCO

  【Product Specifications】
  ・Material-Hardened stainless steel (INOX)
  ・With wooden case
  ・Millimeter scales
  ・Length x Width x Thickness (mm)…500 x 30 x 6
  ・Straightness (μm)…35

  Days to Ship:	4 Day(s) or more

• 

  [Hardened Stainless Steel] Workshop Ruler EA720YK-73

  ESCO

  【Product Specifications】
  ・Material-Hardened stainless steel (INOX)
  ・With wooden case
  ・Millimeter scales
  ・Length x Width x Thickness (mm)…1,500 x 40 x 8
  ・Straightness (μm)…85

  Days to Ship:	3 Day(s) or more

• 

  Straight Ruler (Steel) EA720YY-1

  ESCO

  【Product Specifications】
  ・Equivalent to JIS top grade
  ・Width-13mm
  ・Thickness-Approx. 0.3mm (including adhesive tape)
  ・Tape material-Steel
  ・The tape can be affixed just by removing the backing paper.
  ・For machine and workbench where dimensions need to be checked
  ・Length…1m

  Days to Ship:	4 Day(s) or more

• 

  Scale Dips

  NIIGATA SEIKI (SK)

  Scale ideal for accurate scribing work and for measuring width, height, and depth.
  [Features]
  · It can be installed on a JIS size linear scale.
  · With a locking screw, it is possible to fix the stopper at any arbitrary position on the scale in order to take dimension measurements.
  [Applications]
  · Can be used for measurement from the end face, scribing work, and dimension measuring for metal and wood processing.

  Days to Ship:	2 Day(s) or more

• 

  Stopper for Direct Edge

  SHINWASOKUTEI

  A stopper to be attached to a straight ruler.
  [Features]
  · By attaching this product to a straight ruler, you can measure not only length but also depth or steps.
  [Applications]
  · Ideal for scribing work and measuring length, depth and level difference.

  Days to Ship:	1 Day(s) or more

• 

  Narrow Width Carpenter's Square Angle Ruler

  SHINWASOKUTEI

  A ruler for measuring the dimensions of rounded shapes or for adhering to machinery etc.
  [Features]
  · A thin, narrow width type.
  · Same quality as JIS standard products.
  · Silver-coated for easily readable scale.
  · Etched and plated scale maintains its performance even under harsh conditions.
  [Applications]
  · Ideal for measuring length.

  Days to Ship:	1 Day(s) or more

• 

  Mini Scale, 15 cm, Upper and Lower Level 1 mm Pitch

  SHINWASOKUTEI

  A straight scale with a clip that can slide for use as a simple depth gauge.
  [Features]
  · Narrow and easily portable.
  · With a clip for preventing loss/drop.
  · Silver processing suppresses the surface reflection to make the scale easy to read.
  [Applications]
  · Ideal for measuring length.

  Days to Ship:	2 Day(s) or more

• 

  Catch-Up Scale Kaidan Scale

  NIIGATA SEIKI (SK)

  A ruler featuring a newly designed stepped scale which helps prevent user error when taking measurements in mm units.
  [Features]
  · Adopts a stepped scale with 1 mm graduations.
  · The end of the scale is bent, making it easy to grasp with one hand.
  · Features continuous numbering and a +2 mm point scale for quicker taking of measurements.
  · Features 0.5 mm graduations, allowing it to be used for even more detailed work. (CU-15KDF only)
  · The end of the scale is bent, making it easy to grasp with one hand.
  · Features a silver finish. The outer peripheral surface has been finished with a light chamfer, making it even safer to handle. (JIS B7516 standards)
  [Applications]
  · Used for delineation, scribing and measuring dimensions.

  Days to Ship:	2 Day(s) or more

• 

  Cutter Guide

  TJM DESIGN

  Days to Ship:	3 Day(s) or more

• 

  Stopper for Direct Edge

  TRUSCO NAKAYAMA

  [Features]
  · Mounting on a carpenter's square makes it effective for scribing work and measurements of width, height, and depth.
  · It can be mounted on a JIS size ruler.
  [Applications]
  · For scribing and measuring dimensions of metal and wood.

  Days to Ship:	3 Day(s) or more

• 

  Scale Caliper

  TOEIKOGYO

  Calipers can be read in 0.1 mm increments and are equipped with a Vernier stopper.
  [Features]
  · T-shaped hook and 0.1 mm scale vernier stopper added to JIS Class scale.
  · A copper plate spring is built into the stopper to keep the scale from wobbling.
  · 0.4 mm Vernier scale plate reduces reading errors due to parallax.
  · Little measurement error as the product adheres to the measured object to take measurements.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cutter Ruler, Cut Master EX with Handle

  SHINWASOKUTEI

  [Features]
  · The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
  · An incision-free, non-slip rubber has been adopted.
  · Made of elastomer resin. Adopts an easy-grip, easy-hold handle.
  · Each scale on the upper and lower levels has a left base point W starting from the edge.
  · With a foot equivalent scale convenient for carpenters.
  · Light, non-rusting, and durable.
  · Large, vivid scale numerals have been adopted.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cutter Ruler, with Cutting Rail

  SHINWASOKUTEI

  A ruler which can be used for measuring length, drawing a straight line, or cutting.
  [Features]
  · Aluminum cutter ruler with emphasis on safety.
  [Applications]
  · For length measurement, line drawing, cutting and use as a circular saw guide ruler.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cutter Ruler, Cut Master

  SHINWASOKUTEI

  [Features]
  · The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.
  · Anti-slip rubber is attached to the back surface to fix the ruler easily.
  · Uses a handle with a special shape that is easy to hold down.
  · Double left base point type. The base point of each side (measurement side and cutter side) is the left side. (Part number 65088: base point of the left side)
  · With a foot equivalent scale convenient for carpenters.
  · Large, vivid scale numerals have been adopted.
  · Light, non-rusting, and durable.

  Days to Ship:	2 Day(s) or more

• 

  Aluminum Cutter Ruler, Cut Master with Handle

  SHINWASOKUTEI

  A ruler that can be used for cutting, measuring lengths, demarcation, or as a guide ruler for circular saws.
  [Features]
  · Lightweight and sturdy, with no rust.

  Days to Ship:	2 Day(s) or more

• 

  Machine Scale

  SHINWASOKUTEI

  [Features]
  · All the scales are width 15 mm x thickness 0.5 mm.
  [Material]
  · Stainless steel.

  Days to Ship:	2 Day(s) or more

• 

  Clip Scale, Gentle Scale

  NIIGATA SEIKI (SK)

  A linear scale that can be used for measuring depth with the grip slide and used as a depth gauge for measuring steps.
  [Features]
  · A stepped scale with easy-to-see 1 mm graduations has been adopted.
  · Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.
  · With a clip, it is convenient for carrying around.
  · Silver finish.
  · Slightly chamfered on the circumference surface so that the product can be safely handled with bare hands.
  [Applications]
  · Used for delineation, scribing work, and dimension measurement, etc.

  Days to Ship:	2 Day(s) or more

• 

  Triangular Scale for Architects with Graduation

  NIIGATA SEIKI (SK)

  A total number type straight ruler with a new design featuring a stepped scale that includes reduction scales frequently used in architectural examinations.
  [Features]
  · A triangular scale that includes reduction scales frequently used in architectural examinations.
  · A stepped scale with easy-to-see 1 mm graduations has been adopted.
  · All-number type for rapid reading of values.
  · High-precision laser printed graduations.
  · Reduction scale: 1/20, 1/50, 1/100, 1/200, 1/250, 1/300.
  [Applications]
  · Can be used to measure the actual size of the scale to drawn shapes and figures, and for drafting, reading scaled drawings, etc.

  Days to Ship:	2 Day(s) or more

• 

  Cutting Scale

  SHINWASOKUTEI

  As the cutter surface has a thin stainless steel plate attached for durability, the cutter teeth do not bite in, allowing for a smooth cutting operation.

  Days to Ship:	4 Day(s) or more

Loading...