• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (MYT) 26/5/2019. We apologize for the inconvenience.

Ejector Sleeves

Days to Ship
  • All
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape
P (Tip diameter)(mm)

    Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

      Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

        Short Ejector Sleeves (Bushings For Ejector Pins)

          Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

            Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

              Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                  Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                    Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                      Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                        Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                          Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                            Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                              Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Brand

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                Product Series

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                                Short Ejector Sleeves (Bushings For Ejector Pins)

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Days to Ship 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 1 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more
                                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                                MaterialSKH51SKH51SKD61SKD61SKD61SKD61SKD61SKD61SKD61SKD61SKD61SKD61SKD61SKH51SKH51
                                Surface treatmentNoNoNitridedNitridedNitridedNitridedNitridedNitridedNitridedNitridedNitridedNitridedNitridedNoNo
                                Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)
                                Shaft diameter tolerance0/-0.005 / -0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.030/-0.0050/-0.005 / -0.01/-0.02
                                D/P (Shaft diameter)(mm)3.2 ~ 143.2 ~ 144 ~ 103.5 ~ 104 ~ 104 ~ 103.5 ~ 104 ~ 163.5 ~ 204 ~ 164 ~ 204 ~ 203.5 ~ 203 ~ 82.5 ~ 8
                                V (Hole diameter)(mm)0.8 ~ 12.20.8 ~ 12.21.5 ~ 81.5 ~ 81.5 ~ 81.5 ~ 81.5 ~ 7.91.5 ~ 3001.5 ~ 161.5 ~ 121.5 ~ 151.5 ~ 151.5 ~ 161 ~ 61 ~ 6.8
                                Concentricity between the hole and shaft diameters◎0.005 / ◎0.01◎0.01◎0.06◎0.03◎0.03◎0.03◎0.03◎0.06◎0.06◎0.06◎0.06◎0.06◎0.06◎0.005◎0.01
                                Boring methodGrindingWire cutting & polishingReamingReamingReamingReamingReamingReamingReamingReamingReamingReamingReamingGrinding-
                                Inner dia. tolerance+0.005/0 / +0.01/0+0.01/0H7H7H7H7H7H7H7H7H7H7H7+0.005/0+0.005/0 / +0.01/0
                                Tapered or notNoNoNoNoNoNoNoNoNoNoNoNoNoYesYes
                                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo
                                P (Tip diameter)(mm)-------------2.5 ~ 8-

                                Loading...

                                1. 1

                                Related Categories to Ejector Sleeves