PTL Connector Straight/Relay Harness
Brand :
MISUMI
Caution
Product Description
Small Model General Purpose Connector Harness
● A cable with relay connector fitted with a small PLT connector which can be used as an inter-device connection.
· Straight plugs cannot be mated with one another. Use a panel mount receptacle or a cable for relays when setting up a relay.
· Shield will be cut off by the connector base (not connected).
Since connectors are not yet supported, customized connections are also not available. Alteration service is not available for earth wire mounting, even with standard products.
Wiring and Wire Color Page
>>Click here
Component Page
>>Click here
Specifications
| Specified Length (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| S (Female Plug) |  |    | 2 | 0.2 ~ 50 Can be specified by 0.1m increments | |
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| JP (Male for Relay) |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| SS (Female Plug / Female Plug) |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| JPJP (Male for Relay / Male for Relay) |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| NPLT | SJP (Female Plug / Male for Relay) |  | 2 | ||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| SY (Female Plug / Y Terminal) With Pin No. Insertion Mark Tube |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| JPY (Male for Relay / Y Terminal) With Pin No. Insertion Mark Tube |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| Connector >>Click here | ST (Female Plug / Loose Wires) With Pin No. Insertion Mark Tube |  | 2 | ||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| JPT (Loose Wires / Male for Relay) With Pin No. Insertion Mark Tube |  | 2 | |||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 |
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Nickel-plated |
| Insulator | Bakelite | - |
| Contact | Copper | Nickel-plated |
Contact Arrangement Diagram
Compatible Wire Size
| Number of Cores | Conductor Cross-Sectional Area (mm2) | AWG | Finished Cable Outer Diameter |
|---|---|---|---|
| 2, 3 | 0.5 ~ 0.05 | 20 ~ 30 | φ6.3 ~ φ7 mm |
| 4, 5 | 0.3 ~ 0.05 | 22 ~ 30 | |
| 6, 7, 8 | 0.2 ~ 0.05 | 24 ~ 30 |
Assembly
When soldering, dismantle the connector as shown in the picture on the right.Connector can be dismantled simply by loosening the screws on the sides.
Electrical Properties
| Number of Cores | 2, 3, 4, 5, 6, 7, 8 |
|---|---|
| Rated Current | 5 A or lower |
| Rated Voltage | 125 V or lower |
| Operating Limit Voltage | 200 V or lower |
| Withstand Voltage | 1,000 VAC / 1 minute |
| Insulation Resistance | 1,800 MΩ or more / 500 VDC |
| Contact Resistance | 3 mΩ or less |
| Insertion and Removal Life | Within 200 Times |
| Operating Temperature Range | -20°C ~ +80°C |