Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness

● The cable length can be freely specified. (terminal wire is fixed at 2 m)
● Since wiring work is only required for the external signal, and not between the servo amplifier and PLC, there is a significant reduction in work processes.
● The external wiring cables also come, as standard, prepared with crimped terminals and mark tubes with signal names, which is very convenient when wiring.

· Conforms to the example of standard connection in position control mode.
Check the connection diagram for the function to be implemented. (>>Click here)
· Parts used are the recommended parts listed in the "Mitsubishi Electric Corporation:
MR-J3-□A Servo Amplifier Technical Data." (Some equivalent products used)
· Cable length goes up to 10 m.

Wiring and Wire Color Page >>Click here
Component Page >>Click here