Small AC Induction Motor Right Angle 25～200W

Brand :

MISUMI

Caution

Product Description

Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.

Small AC Induction Motors Right Angle type 25-200W launched as MISUMI Economy series
【Outerline Drawings】
Detailed outline drawings.
Detailed wiring diagrams.
【Usage】
- A general-purpose motor that runs at constant speed for 24 hours, prioritizes cost-effectiveness, and is easy to maintain.
【Product Features】
- High efficiency enable energy saving and stable operation for constant-speed applications such as conveyor.
- Easy selection of various voltages, and low-speed torque.

Product Overview

○Motor

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK	-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK	-
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK	LINK
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	*	*	LINK
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	*	*	LINK
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-	-

*: Scheduled to be released after web production in March 26th

Outline Drawing

Link Pages which have outerline dimension, wiring data are available. Please refer to the page top "Product Description".

<with Terminal Box RC(Hollow shaft) type>

○ Right Angle Series - Lead Wire Type - Terminal Box Type

Standard model90° rotation180° rotation90° reverse rotation
D1D2D3D4

※ If wire direction is not specified, it is automatically selected as D1.

Specification Table

～

Please select the model and parameters according to the options below before placing your order.

		Type		Flange No + W	-	Shaft End Shape	-	Input V Code	-	Additional Option Fan / Terminal Box	-	Additional Option Gearhead Selection		Additional Option Gear Ratio	-	Additional Option Wire Direction
		EA-IMA		4025	-	GN	-	C	-	T	-	RC		30	-	D1

○Motors


Type	Flange No + W		Output Power [W]	Shaft End Shape	Input V Code	Fan	Terminal Box	Gearhead	Wire Direction


Induction Motor EA-IMA	4025	□80	25	GN：GN Gear	〈4poles〉 A ：1-phase 110V、50/60Hz、4poles E ：1-phase 110/120V、60Hz、4poles C ：1-phase 220/230V、50Hz、4poles H ：1-phase 220/230V、60Hz、4poles S ：3-phase 200/220/230V、50/60Hz、4poles S3：3-phase 380/400/415V、50/60Hz、4poles	none	T：Terminal box ※If not selected, Lead Wire type.	RC : Hollow Shaft RT : Solid Shaft (Ratio) 3~180	D1 : Standard D2 : 90° rotation D3 : 180° rotation D4 : 90° reverse rotation ※ If not selected, D1.
	5040	□90	40	GU：GU Gear		none
	5060		60			F ：With fan
	5090		90			F ：With fan
	5120		120			F ：With fan
	6120	□104	120			F ：With fan
	6140		140			F ：With fan
	6200		200			F ：With fan

When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

Note: "-A" means the voltage being 110V, the assembly capacitor value is according to the label.

Specification Overview

○Motor Continuous Rating

❶ ❷			❸	❹
Type No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					[V]	[Hz]	[A]	[mN・m]	[mN・m]	[r/min]	[μF]
EA-IMA4025	□80	25	〈Pinion〉 -GN	-A	1ph 100	50	0.500	120	200	1,250	8.0
				-A	1ph 100	60	0.550	120	165	1,550	8.0
				-E	1ph 110	60	0.450	120	165	1,550	7.0
				-E	1ph 120	60	0.500	120	165	1,550	7.0
				-C	1ph 220	50	0.250	120	200	1,250	1.8
				-C	1ph 230	50	0.230	120	200	1,250	1.8
				-H	1ph 220	60	0.230	120	165	1,550	1.8
				-H	1ph 230	60	0.230	120	165	1,550	1.8
				-S	3ph 220	50	0.185	350	200	1,250	-
				-S	3ph 220	60	0.170	250	165	1,550	-
				-S3	3ph 380	50	0.107	350	200	1,250	-
				-S3	3ph 380	60	0.098	250	165	1,550	-
EA-IMA5040	□90	40	〈Pinion〉 -GU	-A	1ph 100	50	0.65	220	315	1,250	12.0
				-A	1ph 100	60	0.7	220	260	1,550	12.0
				-E	1ph 110	60	0.55	200	260	1,550	8.0
				-E	1ph 120	60	0.6	200	260	1,550	8.0
				-C	1ph 220	50	0.35	220	315	1,250	2.5
				-C	1ph 230	50	0.4	220	315	1,250	2.5
				-H	1ph 220	60	0.35	200	260	1,550	2.5
				-H	1ph 230	60	0.4	200	260	1,550	2.5
				-S	3ph 220	50	0.3	800	315	1,250	-
				-S	3ph 220	60	0.25	660	250	1,550	-
				-S3	3ph 380	50	0.17	800	315	1,250	-
				-S3	3ph 380	60	0.14	660	250	1,550	-
EA-IMA5060	□90	60	〈Pinion〉 -GU	-A	1ph 100	50	1	320	470	1,250	20.0
				-A	1ph 100	60	1.1	320	380	1,550	20.0
				-E	1ph 110	60	0.8	300	380	1,550	12.0
				-E	1ph 120	60	0.85	300	380	1,550	12.0
				-C	1ph 220	50	0.5	340	470	1,250	4.0
				-C	1ph 230	50	0.55	340	470	1,250	4.0
				-H	1ph 220	60	0.5	340	380	1,550	4.0
				-H	1ph 230	60	0.55	340	380	1,550	4.0
				-S	3ph 220	50	0.45	1,000	470	1,250	-
				-S	3ph 220	60	0.4	800	380	1,550	-
				-S3	3ph 380	50	0.26	1,000	470	1,250	-
				-S3	3ph 380	60	0.23	800	380	1,550	-
EA-IMA5090	□90	90	〈Pinion〉 -GU	-A	1ph 100	50	1.55	450	700	1,250	25.0
				-A	1ph 100	60	1.85	450	570	1,550	25.0
				-E	1ph 110	60	1.4	500	570	1,550	20.0
				-E	1ph 120	60	1.45	500	570	1,550	20.0
				-C	1ph 220	50	0.72	450	700	1,250	5.0
				-C	1ph 230	50	0.7	450	700	1,250	5.0
				-H	1ph 220	60	0.71	450	570	1,550	5.0
				-H	1ph 230	60	0.75	450	570	1,550	5.0
				-S	3ph 220	50	0.6	1,350	700	1,250	-
				-S	3ph 220	60	0.55	1,100	570	1,550	-
				-S3	3ph 380	50	0.35	1,350	700	1,250	-
				-S3	3ph 380	60	0.32	1,100	570	1,550	-
EA-IMA5120	□90	120	〈Pinion〉 -GU	-A	1ph 100	50	2.1	600	930	1,250	30.0
				-A	1ph 100	60	2.5	600	750	1,550	30.0
				-E	1ph 110	60	1.65	600	750	1,550	25.0
				-E	1ph 120	60	1.8	600	750	1,550	25.0
				-C	1ph 220	50	1	650	930	1,250	7.0
				-C	1ph 230	50	0.95	650	930	1,250	7.0
				-H	1ph 220	60	1	600	750	1,550	7.0
				-H	1ph 230	60	0.95	600	750	1,550	7.0
				-S	3ph 220	50	0.7	1,850	930	1,250	-
				-S	3ph 220	60	0.6	1,600	750	1,550	-
				-S3	3ph 380	50	0.4	1,850	930	1,250	-
				-S3	3ph 380	60	0.35	1,600	750	1,550	-
EA-IMA6120	□104	120	〈Pinion〉 -GU	-A	1ph 100	50	2.1	600	930	1,250	30.0
				-A	1ph 100	60	2.5	600	750	1,550	30.0
				-E	1ph 110	60	1.7	600	750	1,550	20.0
				-E	1ph 120	60	1.8	600	750	1,550	20.0
				-C	1ph 220	50	0.95	750	930	1,250	8.0
				-C	1ph 230	50	0.95	750	930	1,250	8.0
				-H	1ph 220	60	0.95	700	750	1,550	8.0
				-H	1ph 230	60	1	700	750	1,550	8.0
				-S	3ph 220	50	0.75	2,200	890	1,300	-
				-S	3ph 220	60	0.7	2,000	730	1,600	-
				-S3	3ph 380	50	0.43	2,200	890	1,300	-
				-S3	3ph 380	60	0.4	2,000	730	1,600	-
EA-IMA6140	□104	140	〈Pinion〉 -GU	-A	1ph 100	50	2.7	700	1,080	1,250	35.0
				-A	1ph 100	60	3	700	870	1,550	35.0
				-E	1ph 110	60	1.8	700	850	1,600	25.0
				-E	1ph 120	60	1.95	700	850	1,600	25.0
				-C	1ph 220	50	1.05	850	1,040	1,350	10.0
				-C	1ph 230	50	1.15	850	1,040	1,350	10.0
				-H	1ph 220	60	1.05	750	850	1,600	10.0
				-H	1ph 230	60	1.15	750	850	1,600	10.0
				-S	3ph 220	50	0.85	2,700	1,080	1,250	-
				-S	3ph 220	60	0.75	2,200	870	1,550	-
				-S3	3ph 380	50	0.49	2,700	1,080	1,250	-
				-S3	3ph 380	60	0.43	2,200	870	1,550	-
EA-IMA6200	□104	200	〈Pinion〉 -GU	-A	1ph 100	50	3.2	900	1,520	1,250	45.0
				-A	1ph 100	60	3.5	900	1,230	1,550	45.0
				-E	1ph 110	60	2.75	850	1,230	1,550	35.0
				-E	1ph 120	60	2.65	850	1,230	1,550	35.0
				-C	1ph 220	50	1.4	1,000	1,520	1,250	10.0
				-C	1ph 230	50	1.4	1,000	1,520	1,250	10.0
				-H	1ph 220	60	1.4	900	1,230	1,550	10.0
				-H	1ph 230	60	1.4	900	1,230	1,550	10.0
				-S	3ph 220	50	1.2	3,400	1,520	1,250	-
				-S	3ph 220	60	1	2,700	1,230	1,550	-
				-S3	3ph 380	50	0.69	3,400	1,520	1,250	-
				-S3	3ph 380	60	0.58	2,700	1,230	1,550	-

○AC Motor-Torque Table
・Enter the gear ratio in the box (□) within the model name.
・The speed is calculated by dividing the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio.
The actual speed is 2%~20% less than the displayed value, depending on the size of the load.

	Allowance Torque Unit
	Gear Ratio		3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180
Type (Motor/Gearhead)	50Hz	Speed r/min	500	417	300	250	200	166	150	120	100	83	75	60	50	42	37	30	25	20	16	15	12	10	8
Type (Motor/Gearhead)	60Hz	Speed r/min	600	500	360	300	240	200	180	144	120	100	90	72	60	50	45	36	30	24	20	18	15	12	10
EA-IMA4025-GN-**-RC/RT□	50Hz	N・m	0.31	-	0.52	-	0.99	1.04	1.16	1.64	1.97	2.09	2.32	3.29	3.95	4.73	-	6.58	7.10	8.00	8.00	8.00	8.00	8.00	8.00
	50Hz	kgf・cm	3.07	-	5.12	-	10.1	10.2	11.4	16.8	20.1	20.5	22.7	33.5	40.3	48.3	-	67.1	72.5	80.0	80.0	80.0	80.0	80.0	80.0
	60Hz	N・m	0.26	-	0.44	-	0.80	0.87	0.97	1.33	1.59	1.74	1.93	2.65	3.18	3.82	-	5.30	5.73	7.16	8.00	8.00	8.00	8.00	8.00
	60Hz	kgf・cm	2.56	-	4.26	-	8.12	8.53	9.48	13.5	16.2	17.1	19.0	27.1	32.5	39.0	-	54.1	58.4	73.0	80.0	80.0	80.0	80.0	80.0
EA-IMA5040-GU-**-RC/RT□	50Hz	N・m	0.50	0.60	0.84	1.00	1.58	1.67	1.86	2.63	3.16	3.34	3.71	5.26	6.31	6.80	-	9.50	11.4	14.2	17.0	18.9	20.0	20.0	20.0
	50Hz	kgf・cm	4.91	5.89	8.19	9.82	16.1	16.4	18.2	26.8	32.2	32.8	36.4	53.7	64.4	70.0	-	97.0	116	145	174	193	200	200	200
	60Hz	N・m	0.42	0.50	0.70	0.84	1.27	1.39	1.55	2.12	2.55	2.78	3.09	4.24	5.09	5.50	-	7.64	9.16	11.5	13.7	15.3	18.3	20.0	20.0
	60Hz	kgf・cm	4.09	4.91	6.82	8.19	13.0	13.7	15.2	21.6	26.0	27.3	30.3	43.3	51.9	56.1	-	77.9	93.5	117	140	156	187	200	200
EA-IMA5060-GU-**-RC/RT□	50Hz	N・m	0.75	0.90	1.25	1.50	2.37	2.76	3.06	3.95	4.73	5.51	6.13	7.89	9.47	10.2	-	14.2	17.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	7.37	8.84	12.3	14.7	24.2	27.0	30.0	40.3	48.3	54.0	60.0	80.5	96.6	104	-	145	174	200	200	200	200	200	200
	60Hz	N・m	0.63	0.75	1.04	1.25	1.91	2.30	2.55	3.18	3.82	4.59	5.11	6.36	7.64	8.25	-	11.5	13.7	17.2	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	6.14	7.37	10.2	12.3	19.5	22.5	25.0	32.5	39.0	45.0	50.0	64.9	77.9	84.1	-	117	140	175	200	200	200	200	200
EA-IMA5090-GU-**-RC/RT□	50Hz	N・m	1.13	1.35	1.88	2.26	3.55	3.76	4.18	5.92	7.10	7.52	8.35	11.8	14.2	15.3	-	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	11.1	13.3	18.4	22.1	36.2	36.8	40.9	60.4	72.5	73.7	81.9	121	145	157	-	200	200	200	200	200	200	200	200
	60Hz	N・m	0.94	1.13	1.57	1.88	2.86	3.13	3.48	4.77	5.73	6.27	6.96	9.54	11.5	12.4	-	17.2	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	9.21	11.1	15.4	18.4	29.2	30.7	34.1	48.7	58.4	61.4	68.2	97.4	117	126	-	175	200	200	200	200	200	200	200
EA-IMA5120-GU-**-RC/RT□	50Hz	N・m	1.50	1.80	2.51	3.01	4.73	5.01	5.57	7.89	9.47	10.0	11.1	15.8	18.9	20.0	-	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	14.7	17.7	24.6	29.5	48.3	49.1	54.6	80.5	96.6	98.3	109	161	193	200	-	200	200	200	200	200	200	200	200
	60Hz	N・m	1.25	1.50	2.09	2.51	3.82	4.18	4.64	6.36	7.64	8.35	9.28	12.7	15.3	16.5	-	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	12.3	14.7	20.5	24.6	39.0	40.9	45.5	64.9	77.9	81.9	91.0	130	156	168	-	200	200	200	200	200	200	200	200
EA-IMA6120-GU-**-RC/RT□	50Hz	N・m	1.50	1.80	2.51	3.01	4.26	5.01	5.57	7.89	9.47	10.0	11.14	15.8	18.9	20.1	22.3	28.4	34.1	42.6	51.1	56.8	60.0	60.0	60.0
	50Hz	kgf・cm	14.7	17.7	24.6	29.5	43.5	49.1	54.6	80.5	96.6	98.3	109	161	193	196	218	290	348	435	522	580	600	600	600
	60Hz	N・m	1.25	1.50	2.09	2.51	3.44	4.18	4.64	6.36	7.64	8.35	9.28	12.7	15.3	16.7	18.6	22.9	27.5	34.4	41.2	45.8	55.0	60.0	60.0
	60Hz	kgf・cm	12.3	14.7	20.5	24.6	35.1	40.9	45.5	64.9	77.9	81.9	91.0	130	156	164	182	234	280	351	421	467	561	600	600
EA-IMA6140-GU-**-RC/RT□	50Hz	N・m	1.75	2.11	2.92	3.01	4.97	5.85	6.50	9.21	11.0	11.7	13.0	18.4	22.1	23.4	26.0	33.1	39.8	49.7	59.6	60.0	60.0	60.0	60.0
	50Hz	kgf・cm	17.2	20.6	28.7	29.5	50.7	57.3	63.7	93.9	113	115	127	188	225	229	255	338	406	507	600	600	600	600	600
	60Hz	N・m	1.46	1.75	2.44	2.92	4.01	4.87	5.41	7.42	8.91	9.75	10.8	14.8	17.8	19.5	21.7	26.7	32.1	40.1	48.1	53.4	60.0	60.0	60.0
	60Hz	kgf・cm	14.3	17.2	23.9	28.7	40.9	47.8	53.1	75.8	90.9	95.5	106	152	182	191	212	273	327	409	491	545	600	600	600
EA-IMA6200-GU-**-RC/RT□	50Hz	N・m	2.51	3.01	4.18	5.01	6.27	8.35	9.28	13.9	15.3	16.7	18.6	25.2	30.3	33.4	37.1	50.4	60.0	60.0	60.0	60.0	60.0	60.0	60.0
	50Hz	kgf・cm	24.6	29.5	40.9	49.1	61.4	81.9	91.0	142	150	164	182	257	309	327	364	515	600	600	600	600	600	600	600
	60Hz	N・m	2.09	2.51	3.48	4.18	5.80	6.96	7.74	11.2	12.8	13.9	15.5	20.3	24.4	27.9	30.9	40.7	48.8	60.0	60.0	60.0	60.0	60.0	60.0
	60Hz	kgf・cm	20.5	24.6	34.1	40.9	56.9	68.2	75.8	115	125	136	152	207	249	273	303	415	498	600	600	600	600	600	600

Product Features

Feature 1: Generally, Micro induction motor refers to the motor rotated by the induction. Induction motor relies on capacitor and electromagnetism when starting and rotating.
Though its starting torque is not very high, it has a simple structure, high efficiency and can rotate continue.

Feature 2: The single-phase motor have a reverse direction with the rotating's when operated.
Please change the direction of single-phase motor rotation only after bring the motor to a stop.

Feature 3: Three-phase motor relies on three-phase supply, it has a high efficiency and can get a high starting torque.