(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Vehicle Maintenance Tools（Page8）
| Days to Ship |
|
|---|
-
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.Standard Price: MYR 371.91 Days to Ship: 9 Day(s) -
19.0 Sq. Head Bolt Flywheel Wrench
KTC(KYOTO TOOL)
[Applications]
· Dedicated wrench used when removing or installing the engine cylinder head bolt or flywheel bolt.
[Features]
· 4 sizes that can be used on head bolts and flywheel bolts for Isuzu and Mitsubishi Fuso vehicles.Standard Price: MYR 286.92- Days to Ship: 8 Day(s) -
19.0 Sq. Head Bolt Flywheel Wrench Set
KTC(KYOTO TOOL)
[Applications]
·Dedicated wrench used to attach and detach engine cylinder head bolts and flywheel boltsStandard Price: MYR 977.34 Days to Ship: 8 Day(s) -
Standard Price: MYR 348.21 Days to Ship: 8 Day(s) -
Standard Price: MYR 141.48 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Use to cut sealing packing when removing oil pans.
[Features]
· Arc-shaped cutter can be driven into the seal section.
· The side cutter has a sharp angle and fits well against the base when driven in from the side, enabling movement.
· The cutter shape, large striking edge and removable handle enable work to be performed safely.
· Remove handle to work in confined places and remove oil pans easily.Standard Price: MYR 390.91 Days to Ship: 9 Day(s) -
Engine Mechanical Hanger Compatible With Impact Absorbing Body
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for holding automotive engine.
[Scope]
· Compatible with engines for FF lightweight to ordinary vehicles.
(Excluding vehicles that does not have fender, strut tower or front support installation bolt, trucks and minivans)
· Maximum usage load: 2,450 N (250 kgf) or less
[Features]
· Compatible with impact absorbing bodies commonly adopted in recent vehicles.
· This tool can be set stably and parallel to the ground even if the fender is inclined or tilted downward.
· Compatible with models having short fender ribs that are not supported with conventional parts, or models in which tools cannot be set between fenders.
· Vehicle can be moved or lifted up and down while the engine is held.
· Because the bridge can be set in an inclined state, the hanger can be used with the bridge shifted from above the belt when replacing the belt, etc.
· Utilizes backward type winch. Drive section can be switched between left and right and moved to the desired position.
· Winch can be operated remotely with a chain wheel even while the vehicle is lifted up.Standard Price: MYR 5,763.53 Days to Ship: 8 Day(s) -
Optional Kit For Engine Mechanical Hanger (Kit Compatible With Older Models)
KTC(KYOTO TOOL)
· Conventional engine mechanical hanger (ATH10)
Standard Price: MYR 3,003.46 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
[Scope]
· Mainly for Nissan FF manual transmission vehicles (AC301-10)
· Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
· Mainly for older Nissan FR manual transmission vehicles (AC301-17)
[Features]
· Adopted 12.7 sq. to support drain plugs tightened with a large torque.
· Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.Standard Price: MYR 102.41- Days to Ship: 9 Day(s) -
12.7 Sq. Drain Plug Socket Set (3 Pc Set)
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
[Scope]
· Mainly for Nissan FF manual transmission vehicles (AC301-10)
· Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
· Mainly for older Nissan FR manual transmission vehicles (AC301-17)
[Features]
· Adopted 12.7 sq. to support drain plugs tightened with a large torque.
· Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.Standard Price: MYR 284.95 Days to Ship: 9 Day(s) -
Standard Price: MYR 1,191.40 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
With this single set, the axles of respective manufacturers can be disassembled and assembled.
[Features]
·This single set can be used for axle disassembly and assembly work
·Compatible with both types, one with the hub bearing on the inner side and the other with the hub bearing on the outer side
·Hydraulic press can be used, reducing work labor and work time
·Arms can be attached and detached with a fixed ball in a single-action
·The center bolt has a bearing, and the drive torque is light
·Compatible not only with the axle of FF cars, but also with the rear of FR cars and 4WD cars
·Wide range of applications for, besides axles, steering wheels, differential companion flanges, mission bearings and gears
·It can also be used to pull out various bearings and gears other than automobiles by interchanging the set content products
[Applications]
·Mainly compatible with axles from FF light vehicles to ordinary passenger carsStandard Price: MYR 7,401.64 Days to Ship: 8 Day(s) -
Standard Price: MYR 262.00 Days to Ship: 8 Day(s) -
Standard Price: MYR 474.05 Days to Ship: 9 Day(s) -
Standard Price: MYR 265.23 Days to Ship: 8 Day(s) -
Standard Price: MYR 245.56 Days to Ship: 8 Day(s) -
Standard Price: MYR 235.03 Days to Ship: 8 Day(s) -
Standard Price: MYR 408.76 Days to Ship: 8 Day(s) -
Standard Price: MYR 231.96 Days to Ship: 8 Day(s) -
Standard Price: MYR 199.61 Days to Ship: 9 Day(s) -
Bolt With Hex Socket Head For Multi Puller Hanger Nut
KTC(KYOTO TOOL)
[Features]
· Service part for Multi Puller AS301.Standard Price: MYR 46.08 Days to Ship: 9 Day(s) -
Standard Price: MYR 648.71 Days to Ship: 9 Day(s) -
Standard Price: MYR 133.20 Days to Ship: 9 Day(s) -
Standard Price: MYR 226.36 Days to Ship: 8 Day(s) -
Standard Price: MYR 455.23 Days to Ship: 9 Day(s) -
Standard Price: MYR 168.53 Days to Ship: 8 Day(s) -
Standard Price: MYR 113.16 Days to Ship: 8 Day(s) -
Standard Price: MYR 113.16 Days to Ship: 8 Day(s) -
Standard Price: MYR 212.25 Days to Ship: 9 Day(s) -
Standard Price: MYR 154.58 Days to Ship: 9 Day(s) -
Standard Price: MYR 587.40 Days to Ship: 9 Day(s) -
Standard Price: MYR 500.80 Days to Ship: 9 Day(s) -
Standard Price: MYR 692.50 Days to Ship: 8 Day(s) -
Standard Price: MYR 378.56 Days to Ship: 8 Day(s) -
Standard Price: MYR 269.16 Days to Ship: 8 Day(s) -
Tie Rod End Separator (Offset Type)
KTC(KYOTO TOOL)
[Applications]
· Separation of tie rod end.
[Features]
· Tough design for increased power.
· Rated output is set to 15 kN (1.5 t) and maximum output is set to 30 kN (3 t).
· Supports a larger output compared to conventional part (KTC BJU-1945).
· Highly durable design.
· The offset shape increases durability.
· Fits various models perfectly.
· Range of opening: 16 mm to 50 mm
· Suitable for tie rod ends used in mini cars to 3 L class automobiles.
· Easy operation increases efficiency.
· Mount and remove just by operating the thrust bolt.
· Perform work easily with drive tools.
· Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
· Comes with a "drop-prevention lanyard" for safety.Standard Price: MYR 1,035.46 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Service part for Ball Joint Separator AS202A.Standard Price: MYR 521.80 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Service part for Ball Joint Separator AS202A.Standard Price: MYR 446.86 Days to Ship: 8 Day(s) -
Ball Joint Separator (Offset Type)
KTC(KYOTO TOOL)
[Applications]
· Use to separate ball joints.
[Features]
· Tough design with 2.5 t rated output
· Mount and remove just by operating the thrust bolt.
· Perform work easily with drive tools.
· Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
· Exchange claw and jaw depending on the work environment.
· Comes with a "drop-prevention lanyard" for safety.Standard Price: MYR 1,699.15 Days to Ship: 8 Day(s) -
12.7 Sq. Hub Nut Socket For Impact Wrench
KTC(KYOTO TOOL)
[Features]
· Set of AS308-30W and 32W impact sockets for loosening double hexagon shape front (rear) axle hub nuts. Adopted the AMBAC system (PAT.) to prevent the pin from falling out during use.Standard Price: MYR 189.75- Days to Ship: 9 Day(s) -
12.7 Sq. Hub Nut Socket Set For Impact Wrench
KTC(KYOTO TOOL)
[Applications]
· For using impact wrenches to loosen double hexagon shaped front (rear) axle hub nuts in Toyota vehicles.
[Features]
· The impact wrench socket has a double hexagon shape to match the shape of the hub nut.
· Deep opening and thin outer diameter shape matches the shape of the hub nut.
· Total 75 mm long semi-deep type that does not interfere with drive shaft threads.Standard Price: MYR 343.57 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Removing pitman arms.
[Features]
· The heat-treated forged claw has outstanding durability.
· Comes with a "drop-prevention lanyard" for safety.
· The claws bite inward when the center screw is tightened.
[Scope]
· Pitman outer diameter ø37 to ø47Standard Price: MYR 1,165.31 Days to Ship: 8 Day(s) -
Screw Size Conversion Adapter Set For Slide Hammer Puller
KTC(KYOTO TOOL)
[Features]
· Screw size conversion adapter set for Slide Hammer Puller AUD3.Standard Price: MYR 346.13- Days to Ship: 8 Day(s) -
Drive Shaft Joint Puller Set For Slide Hammer Puller
KTC(KYOTO TOOL)
[Features]
· Drive shaft joint puller set for slide hammer AUD3.Standard Price: MYR 1,292.25 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Disassembly of vehicle undercarriage and processing of sheet metal.
[Scope]
· Mini cars, ordinary passenger cars and compact trucks.
[Features]
· Improved safety. New design concept helps prevent fingers from getting pinched accidentally.
· A set of 2 types of hammers (large and small). 2 types of shocker (hammer) weights (3.5 kg and 1.2 kg) have been to specified to support a variety of work.Standard Price: MYR 963.81- Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Overall Length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) |
| Product Series | Engine Mechanical Hanger Compatible With Impact Absorbing Body | Optional Kit For Engine Mechanical Hanger (Kit Compatible With Older Models) | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) |
| Product Type | Engine Related | Engine Related | Engine Related | Generic Tool | Generic Tool | Generic Tool | Engine Related | Engine Related | Engine Related | Engine Related | Tire-Related | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Generic Tool | Generic Tool | Generic Tool |
| Overall Length(mm) | - | 90 ～ 140 | - | - | 155 | 68 | 1,670 | - | 31 ～ 32 | - | 836 | - | - | - | - | - | - | - | - | - | - | - | 34 | - | - | - | 100 | 100 | - | - | - | - | - | - | - | 135 | - | - | 165 | 75 | 75 | 170 to 230 | 70 ～ 75 | 50 | 580 ～ 675 |
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Overall Length(mm)
- 1,000
- 1,050
- 1,550
- 1,670
- 3,500
- 17
- 18
- 21
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 34.5
- 35
- 40
- 43.2
- 44
- 48
- 49
- 50
- 52
- 54
- 55
- Pin: 55
- 56
- 56.5
- 57
- 58
- 58.5
- 60
- 60.5
- 61
- 61.5
- 62
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 72
- 75
- 79
- 80
- 83
- 85
- 87
- 89
- 90
- 91
- 95
- 100
- 101
- 104
- 105
- 106
- 108
- 110
- 113
- 115
- 119.5
- 120
- 122
- 127
- 130
- 135
- 138
- 139
- 140
- 143
- 145
- 145 to 195
- 148
- 150
- Main body: 151
- 153
- 154
- 155
- 158
- 159
- 160
- 162
- 163
- 164
- 165
- 168
- 170
- 170 to 230
- 172
- 173
- 174
- 175
- 177
- 178
- 179
- 180
- 181
- 184
- 185
- 187
- 189
- 190
- 192
- 193
- 195
- 196
- 197
- 200
- 201
- 202
- 203
- 205
- 208
- A: 208, B: 209, C: 194
- 210
- 210 to 270
- 215
- 220
- 221
- 230
- 233
- 235
- 240
- 250
- 250～400
- 260
- 263
- 265
- 270
- 275
- 282
- 290 to 420
- Holder main body: 300 to 415
- 312
- 322
- 330
- 330~450
- Normal: 340, extended: 400
- 350
- 370
- 379
- 382
- 385
- 400
- 410
- 420
- 423
- 450
- 490
- 505
- 510
- 530
- 540 to 740
- 549
- 550
- 580
- 600
- 650
- 660
- 675
- 750
- 825
- 836
- 1010
- 1600～3200
- 2250
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Vehicle Maintenance Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy