(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Vehicle Maintenance Tools（Page9）
| Days to Ship |
|
|---|
-
Standard Price: MYR 785.66 Days to Ship: 8 Day(s) -
Standard Price: MYR 148.88 Days to Ship: 8 Day(s) -
Days to Ship: 8 Day(s) -
Drive Shaft Joint Puller For Slide Hammer Puller
KTC(KYOTO TOOL)
[Features]
· Drive shaft joint puller for slide hammer puller AUD3.Standard Price: MYR 216.28- Days to Ship: 8 Day(s) -
Standard Price: MYR 837.76 Days to Ship: 8 Day(s) -
Standard Price: MYR 158.43 Days to Ship: 8 Day(s) -
Standard Price: MYR 586.95 Days to Ship: 8 Day(s) -
Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)
KTC(KYOTO TOOL)
[Applications]
· Removing axle shafts, removing brake drums and extruding drive shafts.
[Features]
· This puller can be used for both 4 holes and 5 holes.
· Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
· Can be used with AUD4.Standard Price: MYR 1,436.45 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Service part for Slide Hammer Puller Hub Puller AS30 and AS309.Standard Price: MYR 249.15 Days to Ship: 10 Day(s) or more -
KTC(KYOTO TOOL)
[Applications]
· Cutting drive shaft boot bands and cutting boots.
[Scope]
· Stainless steel boot bands for drive shaft in mini cars to passenger cars.
· Rubber drive shaft boot.
[Features]
· Can cut the boot band while it is attached.
Boots can also be cut, enabling work to be completed quickly.
· After cutting the band, the boot can be cut without exchanging tools.
· The spring opens the jaws easily, and the stopper ensures compact storage.
Pressing the stopper while handles are gripped fixes the handles in a closed state for convenient storage.Standard Price: MYR 284.66 Days to Ship: 1 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Use these pliers to remove (attach) snap rings that do not have a hooking hole.
[Scope]
· Normal type of snap ring with no hooking holes.
· Thin claw tip is compatible even with rings having a narrow opening.
· This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
· Claws are replaceable in the event of wear or damage.
[Features]
· Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
· Work from either above or from the side of the shaft.
· Remove or attach Honda vehicle snap rings, which were difficult to handle before.Standard Price: MYR 259.46 Days to Ship: 9 Day(s) -
Standard Price: MYR 245.80 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Use these pliers to remove (attach) snap rings that do not have a hooking hole.
[Scope]
· Normal type of snap ring with no hooking holes.
· Thin claw tip is compatible even with rings having a narrow opening.
· This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
· Claws are replaceable in the event of wear or damage.
[Features]
· Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
· Work from either above or from the side of the shaft.
· Remove or attach Honda vehicle snap rings, which were difficult to handle before.Standard Price: MYR 259.46 Days to Ship: 9 Day(s) -
Standard Price: MYR 258.11 Days to Ship: 8 Day(s) -
Drive Shaft Remover For Slide Hammer Puller
KTC(KYOTO TOOL)
[Applications]
· Removing the drive shaft from transaxles in FF vehicles.
· This dedicated tool is used with slide hammer pullers (AUD3).Standard Price: MYR 639.83 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Tightening and cutting joint boot fixing bands for drive shafts.
[Scope]
· Outstanding boot bands used in mini cars to passenger cars. (Applicable for all sizes)
[Features]
· Ratchet mechanism enables efficient winding.
· Bending to cutting boot bands performed in one action.Standard Price: MYR 558.26 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
[Scope]
· Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
[Features]
· Clamp the boot band easily just by screwing in the center bolt.
· Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
· Center bolt is flanged so the wrench does not deviate even when using offset wrench.
· Handle grip is made of non-slip plastic.
· Clamping section adopted a claw shape that does not rise up.Standard Price: MYR 1,018.81 Days to Ship: 8 Day(s) -
Housing Nut Wrench (For Hexagon / Octagon Nut)
KTC(KYOTO TOOL)
[Applications]
· Tightening and loosening rear housing nuts of large vehicles.
[Scope]
· Rear housing nuts used in large vehicles (4 t and larger).
Hexagon: Width across flats 85 mm to 130 mm
Octagon: Width across flats 90 mm to 125 mm
[Features]
· Special claw shape supports both hexagon and octagon bolts.
· Special claw shape securely holds the sides of the nut.
· Just turn the hexagon knob with an offset wrench or drive tool with a 17 mm width across flats.Standard Price: MYR 2,710.20 Days to Ship: 8 Day(s) -
Housing Nut Wrench (For Round Nut)
KTC(KYOTO TOOL)
[Applications]
· Tightening and loosening rear housing nuts.
[Scope]
· Rear housing nuts used with compact vehicles (2 t class).
[Features]
· Compatible with a variety of models just by sliding the pin to the appropriate pitch.
· Scale display is on the wrench body, simplifying centering work.Standard Price: MYR 521.80 Days to Ship: 8 Day(s) -
Pin A (For Pin Hole Diameter ø6.8 To 9)
KTC(KYOTO TOOL)
[Features]
· Service part for Housing Nut Wrench AS352.Standard Price: MYR 190.20 Days to Ship: 8 Day(s) -
Pin B (For Pin Hole Diameter ø9.1 To 10)
KTC(KYOTO TOOL)
[Features]
· Service part for Housing Nut Wrench AS352.Standard Price: MYR 190.20 Days to Ship: 8 Day(s) -
Rear Hub Puller For Large Vehicle
KTC(KYOTO TOOL)
[Applications]
· Removing rear wheel hubs on large vehicles.
[Scope]
· Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
· 8 or 10 holes (number of axle shaft mounting bolts)
· P.C.D 140 mm to 188 mm
· Axle shaft mounting bolt size M12 to M16
[Features]
· Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
· Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.Standard Price: MYR 1,988.01 Days to Ship: 9 Day(s) -
Rear Hub Puller For Large Vehicle Center Bolt
KTC(KYOTO TOOL)
[Features]
· Service part for Rear Hub Puller for Large Vehicle AS353.Standard Price: MYR 361.96 Days to Ship: 8 Day(s) -
Rear Hub Puller For Large Vehicles, Spacer
KTC(KYOTO TOOL)
[Features]
· Service part for Rear Hub Puller for Large Vehicle AS353.Standard Price: MYR 386.48 Days to Ship: 8 Day(s) -
Front Hub Puller For Large Vehicle Center Bolt
KTC(KYOTO TOOL)
It is a spare part for the front hub puller AS354 for large vehicles.
Standard Price: MYR 414.56 Days to Ship: 8 Day(s) -
Front Hub Puller Arm For Large Vehicle
KTC(KYOTO TOOL)
[Features]
· Service part for Front Hub Puller for Large Vehicle AS354. (Includes 2 pcs)Standard Price: MYR 701.18- Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Charging grease to hub bearings during various automobile inspections and maintenance work.
[Features]
· Can shorten work time to approx. 1/7th. (KTC experiment ratio)
· Suitable for a variety of applications.
· Increase work efficacy while preventing hand contamination.
· Grease in the can will be suctioned up to the last drop so waste is eliminated and grease is conserved.Standard Price: MYR 4,614.34 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Charging grease to heavy load bearings in large automobiles.
· Charging grease to hub bearings during various automobile inspections and maintenance work.
[Features]
· Adopted a bearing lock mechanism.
Bearings are locked with upper and lower cones so that grease is prevented from seeping from the bearing clearance. This design ensures that the force applied on the handle is all converted to grease charging pressure.
Bearings can be locked with a single touch.
· Diverse range of applications.
Compatible with a variety of bearing sizes used in automobiles (from mini cars to large vehicles) and construction equipment, etc.
· Easy operation increases work efficacy while preventing hand contamination.
Exchange grease easily without any need for advanced skills.
Since hands are not contaminated with grease, the next work can be started right away.
· Eliminate waste and conserve grease.
The minimum required grease is injected, and the can of grease can be completely used up. Consumption is reduced compared to manual work.
· Simple, trouble-free mechanism.
Very little trouble because the mechanism is simple and has outstanding durability.Standard Price: MYR 5,935.54 Days to Ship: 8 Day(s) -
Grease Exchanger Highload Assy
KTC(KYOTO TOOL)
[Features]
· Exchangeable assembly to convert grease exchangers (GZ18) so they can be used for high loads. This assembly can be mounted only on the (A) type. Press the bellows under the lower cone and check for lock nut to determine compatibility.Standard Price: MYR 1,716.94 Days to Ship: 8 Day(s) -
Air Grease Feeder Locking Type Upper Cone
KTC(KYOTO TOOL)
[Features]
· Service part for Air Grease Feeder AVG35.Standard Price: MYR 1,175.76 Days to Ship: 8 Day(s) -
Air Grease Feeder Nozzle (4 Pc Set)
KTC(KYOTO TOOL)
[Features]
· Service part for Air Grease Feeder AVG35.Standard Price: MYR 325.21 Days to Ship: 9 Day(s) -
Strut Spring Compressor Standard Arm (Outer Diameter 90 To 170)
KTC(KYOTO TOOL)
[Features]
· Service part for Strut Spring Compressor AS10.Standard Price: MYR 2,740.83 Days to Ship: 8 Day(s) -
Strut Spring Compressor Large Arm (Outer Diameter 135 to 220)
KTC(KYOTO TOOL)
[Features]
· Service part for Strut Spring Compressor AS10.Standard Price: MYR 3,844.51 Days to Ship: 8 Day(s) -
12.7 Sq. Impact Wrench Socket For Aluminum Wheel Ornamental Nut
KTC(KYOTO TOOL)
[Features]
· Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.Standard Price: MYR 163.78- Days to Ship: 8 Day(s) or more -
KTC(KYOTO TOOL)
[Applications]
· Removing wheel caps for automobiles.
[Features]
· Thin shape is easy to insert between wheel rim and wheel cap and does not cause scratches.
· With angle for making work easy.
· Uses plastic grip which fits hand.Standard Price: MYR 189.95 Days to Ship: 8 Day(s) -
Aluminum Wheel Center Cap Wrench
KTC(KYOTO TOOL)
[Features]
·The tip part is low profile, compact, scratch resistant, and easy to insert into the notch
·With 2 levels of angle for easy work
·Adoption of a resin grip that fits in your hand
[Applications]
·Removal of aluminum wheel center cap for automobilesStandard Price: MYR 98.61 Days to Ship: 8 Day(s) -
12.7 Sq. Impact Wrench Socket Set For Aluminum Wheel Ornamental Nuts
KTC(KYOTO TOOL)
[Features]
· Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.Standard Price: MYR 515.06 Days to Ship: 9 Day(s) -
12.7 Sq. Impact Wrench Socket For Wheel Nut (Long And Thin)
KTC(KYOTO TOOL)
[Features]
· Rubber cushion protects plated nuts and ornamental nuts.
· [Applications]
· A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.Standard Price: MYR 166.36- Days to Ship: 9 Day(s) -
Standard Price: MYR 201.55- Days to Ship: 8 Day(s) -
Standard Price: MYR 226.34- Days to Ship: 8 Day(s) -
![Brake Tool Set (For Drum Brakes) [12 Items]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916005/223011916005_001.jpg?$product_view_b$)
Brake Tool Set (For Drum Brakes) [12 Items]
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool set for disassembly, assembly and adjustment of automotive drum brakes.
[Scope]
· Drum brake systems in mini cars to compact trucks (up to 2 t class).Standard Price: MYR 1,196.61 Days to Ship: 8 Day(s) -
![Brake Tool Set (For Disc Brakes) [6 Items]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916016/223011916016_001.jpg?$product_view_b$)
Brake Tool Set (For Disc Brakes) [6 Items]
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool set for disassembly, assembly and adjustment of automotive disc brakes.
[Scope]
· Disc brake systems in mini cars to compact trucks (up to 2 t class).Standard Price: MYR 1,378.70 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Removing and attaching brake drum screws and door hinge bolts, etc.
[Features]
· T-shaped handle with thick non-slip grip is easy to apply force with.
· Can also be used to remove and attach door hinge bolts, etc.Standard Price: MYR 195.13 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
Has a curved shaft so that springs move smoothly.
Grip is designed for a good fit, making assembly easier.Standard Price: MYR 159.35 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Scope]
· Removal of brake drums mainly for mini cars.
[Features]
· The sliding handle allows brake drums to be removed easily without the handles interfering when using 2 removers.
· Replaceable end screw section allows worn screw to be restored just by replacing the end screw.Standard Price: MYR 173.03- Days to Ship: 8 Day(s) or more
![Brake Tool Set (For Drum Brakes) [12 Items]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916005/223011916005_001.jpg?$product_view_b$)
![Brake Tool Set (For Disc Brakes) [6 Items]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916016/223011916016_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Overall Length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) |
| Product Series | Strut Spring Compressor Standard Arm (Outer Diameter 90 To 170) | Strut Spring Compressor Large Arm (Outer Diameter 135 to 220) | 12.7 Sq. Impact Wrench Socket For Aluminum Wheel Ornamental Nut | 12.7 Sq. Impact Wrench Socket Set For Aluminum Wheel Ornamental Nuts | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 10 Day(s) or more | 1 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more |
| Product Type | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Engine Related | Engine Related | Engine Related | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Engine Related | Engine Related | Engine Related | Engine Related | Engine Related | Engine Related | Engine Related | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Tire-Related | Generic Tool | Generic Tool | Brake Related | Brake Related | Brake Related | Brake Related | Brake Related |
| Overall Length(mm) | - | - | - | 50 | - | - | - | 154 | 138 | 193 | 168 | - | 168 | - | - | 160 | 175 | 197 | - | 75 | 75 | - | 160 | 100 | 260 | 180 | - | - | - | - | - | - | - | 49 ～ 52 | 350 | 235 | - | 100 | 56.5 ～ 60.5 | 61.5 ～ 63.5 | - | - | 270 | 265 | 160 |
![Brake Tool Set (For Drum Brakes) [12 Items]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011916005/223011916005_001.jpg?$product_view_c$)
![Brake Tool Set (For Disc Brakes) [6 Items]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011916016/223011916016_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Overall Length(mm)
- 1,000
- 1,050
- 1,550
- 1,670
- 3,500
- 17
- 18
- 21
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 34.5
- 35
- 40
- 43.2
- 44
- 48
- 49
- 50
- 52
- 54
- 55
- Pin: 55
- 56
- 56.5
- 57
- 58
- 58.5
- 60
- 60.5
- 61
- 61.5
- 62
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 72
- 75
- 79
- 80
- 83
- 85
- 87
- 89
- 90
- 91
- 95
- 100
- 101
- 104
- 105
- 106
- 108
- 110
- 113
- 115
- 119.5
- 120
- 122
- 127
- 130
- 135
- 138
- 139
- 140
- 143
- 145
- 145 to 195
- 148
- 150
- Main body: 151
- 153
- 154
- 155
- 158
- 159
- 160
- 162
- 163
- 164
- 165
- 168
- 170
- 170 to 230
- 172
- 173
- 174
- 175
- 177
- 178
- 179
- 180
- 181
- 184
- 185
- 187
- 189
- 190
- 192
- 193
- 195
- 196
- 197
- 200
- 201
- 202
- 203
- 205
- 208
- A: 208, B: 209, C: 194
- 210
- 210 to 270
- 215
- 220
- 221
- 230
- 233
- 235
- 240
- 250
- 250～400
- 260
- 263
- 265
- 270
- 275
- 282
- 290 to 420
- Holder main body: 300 to 415
- 312
- 322
- 330
- 330~450
- Normal: 340, extended: 400
- 350
- 370
- 379
- 382
- 385
- 400
- 410
- 420
- 423
- 450
- 490
- 505
- 510
- 530
- 540 to 740
- 549
- 550
- 580
- 600
- 650
- 660
- 675
- 750
- 825
- 836
- 1010
- 1600～3200
- 2250
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Vehicle Maintenance Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy