Small AC Brake Speed Control Motor 25～200W

Brand :

MISUMI

Caution

Product Description

Small AC Brake Motors Right Angle type 25-200W launched as MISUMI Economy series
【Outerline Drawings】
Detailed outline drawings (on processing and update in June 2026).
Detailed wiring diagrams.
【Usage】
- Suitable for small motors used in lifting devices or safety stop applications where immediate stop and position holding are required when power is off.
【Product Features】
- Equipped with an electromagnetic brake, enabling immediate stop and hold even when power is cut, and safe operation during power outages.
- Operates with the same power supply and allows easy selection of holding torque.
- Ideal for devices requiring safe stop, such as lifting and vertical transport.

Product Overview

○Motor

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller	Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK		-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK		EA-A23
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK		EA-ZF EA-A22 EA-A23
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	LINK	LINK		EA-ZF EA-A22 EA-A23
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	LINK	LINK		EA-A23
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-		EA-A21

Outline Drawing

○ Right Angle Series - Lead Wire Type - Terminal Box Type

Standard model 90° rotation 180° rotation 90° reverse rotation
D1 D2 D3 D4

※ If wire direction is not specified, it is automatically selected as D1.

Specification Table

～

Please select the model and parameters according to the options below before placing your order.

		Type		Flange Size + W	-	Shaft End Shape	-	Input V Code	-	Additional Option Fan / Terminal Box	-	Additional Option Gearhead Selection		Additional Option Gear Ratio
		EA-ABM		5040	-	GU	-	C	-	T	-	GH		30

Type	No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Additional Option Fan / Terminal Box	Additional Option Gearhead Selection	Additional Option Gear Ratio


Brake Speed Control Motor EA-ABM	4025	□80	25	GN：GN Gear	⟨4poles⟩ A ：Single 110V、50/60Hz、4poles E ：Single 110/120V、50/60Hz、4poles C ：Single 220/230V、50Hz、4poles H ：Single 220/230V、60Hz、4poles	none	None : No gearhead GH10X : Gearhead 10X GH : Gearhead	3~200
	5040	□90	40			none
	5060		60	GU：GU Gear		F：With fan
	5090		90			F：With fan
	5120		120			F：With fan
	6120	□104	120			F：With fan
	6140		140			F：With fan
	6200		200			F：With fan

Specification Overview

○Motor Continuous Rating

														Allowance Torque
Type No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor	Speed Control Range		At 1200	At 90
					Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor	Speed Control Range		r/min	r/min
					[V]	[Hz]	[A]	[mN・m]	[mN・m]	[r/min]	[μF]	Min.	Max.	[mN・m]	[mN・m]
EA-ABM4025	□80	25	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.59	160	200	1,250	10.0	90	1,350	190	47
				-A	1ph 100	60	0.69	140	165	1,550	10.0	90	1,650	190	47
				-E	1ph 110	60	0.45	140	165	1,550	8.0	90	1,650	190	50
				-E	1ph 120	60	0.50	140	165	1,550	8.0	90	1,650	190	50
				-C	1ph 220	50	0.29	140	200	1,250	2.2	90	1,350	190	47
				-C	1ph 230	50	0.30	160	200	1,250	2.2	90	1,350	190	47
				-H	1ph 220	60	0.35	140	165	1,550	2.2	90	1,650	190	45
				-H	1ph 230	60	0.35	140	165	1,550	2.2	90	1,650	190	45
EA-ABM5040	□90	40	〈Pinion〉 -GN -GU 〈Round〉 -A	-A	1ph 100	50	0.78	300	315	1,250	15.0	90	1,350	260	70
				-A	1ph 100	60	1.05	300	260	1,550	15.0	90	1,650	260	70
				-C	1ph 220	50	0.45	270	315	1,250	3.0	90	1,350	300	75
				-C	1ph 230	50	0.45	270	315	1,250	3.0	90	1,350	300	75
EA-ABM5060	□90	60	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	1.26	470	470	1,250	25.0	90	1,350	460	140
				-A	1ph 100	60	1.70	470	380	1,550	25.0	90	1,650	490	160
				-C	1ph 220	50	0.55	420	470	1,250	4.5	90	1,350	490	140
				-C	1ph 230	50	0.60	460	470	1,250	4.5	90	1,350	490	140
EA-ABM5090	□90	90	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	1.78	600	700	1,250	30.0	90	1,350	710	230
				-A	1ph 100	60	2.35	600	570	1,550	30.0	90	1,650	710	260
				-C	1ph 220	50	0.82	560	700	1,250	6.0	90	1,350	710	230
				-C	1ph 230	50	0.81	560	700	1,250	6.0	90	1,350	710	230
EA-ABM5120	□90	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	2.25	700	930	1,250	35.0	90	1,350	750	330
				-A	1ph 100	60	2.85	700	750	1,550	35.0	90	1,650	750	330
				-C	1ph 220	50	1.00	650	930	1,250	7.0	90	1,350	750	330
				-C	1ph 230	50	0.95	650	930	1,250	7.0	90	1,350	750	330
EA-ABM6120	□104	120	〈Pinion〉 -GU 〈Round〉 -A	-C	1ph 220	50	0.95	750	930	1,250	8.0	90	1,350	750	330
EA-ABM6120	□104	120	〈Pinion〉 -GU 〈Round〉 -A	-C	1ph 230	50	0.95	750	930	1,250	8.0	90	1,350	750	330
EA-ABM6140	□104	140	〈Pinion〉 -GU 〈Round〉 -A	-C	1ph 220	50	1.05	850	1040	1,250	10.0	90	1,350	830	420
EA-ABM6140	□104	140	〈Pinion〉 -GU 〈Round〉 -A	-C	1ph 230	50	1.15	850	1040	1,250	10.0	90	1,350	830	420
EA-ABM6200	□104	200	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	3.20	900	1385	1,250	45.0	90	1,350	920	500
				-A	1ph 100	60	3.50	900	1120	1,550	45.0	90	1,350	920	500
				-C	1ph 220	50	1.40	1100	1385	1,250	12.0	90	1,350	920	500
				-C	1ph 230	50	1.40	1100	1385	1,250	12.0	90	1,350	920	500

○AC Motor-Torque Table
・Enter the gear ratio in the box (□) within the model name.
・The speed is calculated by dividing the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio.
The actual speed is 2%~20% less than the displayed value, depending on the size of the load.

	Allowance Torque Unit
	Gear Ratio		3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
Type (Motor/Gearhead)	50Hz	Speed r/min	500	417	300	250	200	166	150	120	100	83	75	60	50	41	37	30	25	20	16	15	12.5	10	8.3	7.5
Type (Motor/Gearhead)	60Hz	Speed r/min	600	500	360	300	240	200	180	144	120	100	90	72	60	50	45	36	30	24	20	18	15	12	10	9
EA-ABM4025-GN-**-GH□K	50Hz	N・m	0.49	0.58	0.81	0.97	1.2	1.5	1.55	2	2.4	2.9	3.17	3.7	4.4	5.3	5.57	6.6	7.9	8	8	8	8	8	8	8
	50Hz	kgf・cm	5	5.91	8.26	9.89	12.2	15.3	15.8	20.4	24.4	29.6	32.3	37.7	44.9	54.1	56.8	67.3	80	80	80	80	80	80	80	80
	60Hz	N・m	0.4	0.48	0.67	0.8	10	1.2	1.25	1.7	2	2.4	2.64	3	3.6	4.3	4.49	5.4	6.5	8	8	8	8	8	8	8
	60Hz	kgf・cm	4.08	4.89	6.83	8.16	10.2	12.2	12.8	17.3	20.4	24.4	26.9	30.6	36.7	43.8	45.8	55.1	66.3	80	80	80	80	80	80	80
EA-ABM5040-GN-**-GH□K	50Hz	N・m	0.77	0.92	1.3	1.5	1.9	2.3	2.38	3.2	3.8	4.6	4.88	5.7	6.9	8.3	8.57	10	10	10	10	10	10	10	10	10
	50Hz	kgf・cm	7.85	9.38	13.2	15.3	19.4	23.4	24.3	32.6	38.7	46.9	49.8	58.1	70.4	84.7	87.4	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.63	0.76	1.1	1.3	1.6	1.9	2	2.6	3.2	3.8	4.07	4.7	5.7	6.8	7.19	8.6	10	10	10	10	10	10	10	10
	60Hz	kgf・cm	6.42	7.75	11.2	13.2	16.3	19.3	20.4	16.5	32.6	38.7	41.5	47.9	58.1	69.3	73.4	87.7	100	100	100	100	100	100	100	100
EA-ABM5060-GN-**-GH□K	50Hz	N・m	1.1	1.4	1.9	2.3	2.9	3.4	3.57	4.8	5.7	6.8	7.03	8.6	10	10	10	10	10	10	10	10	10	10	10	10
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.4	48.9	58.1	69.3	71.7	87.7	100	100	100	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.92	1.1	1.5	1.8	2.3	2.8	2.99	3.8	4.6	5.5	5.7	6.9	8.3	10	10	10	10	10	10	10	10	10	10	10
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.5	38.7	46.9	56.1	58.2	70.4	84.7	100	100	100	100	100	100	100	100	100	100	100
EA-ABM5040-GU--GH□K EA-ABM5040-GU--GH□KB	50Hz	N・m	1.1	1.4	1.9	2.3	2.9	3.4	3.57	4.8	5.7	6.8	7.03	8.6	10	10	10	10	10	10	10	10	10	10	10	10
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.4	48.9	58.1	69.3	71.7	87.7	100	100	100	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.92	1.1	1.5	1.8	2.3	2.8	2.99	3.8	4.6	5.5	5.7	6.9	8.3	10	10	10	10	10	10	10	10	10	10	10
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.5	38.7	46.9	56.1	58.2	70.4	84.7	100	100	100	100	100	100	100	100	100	100	100
EA-ABM5060-GU--GH□K EA-ABM5060-GU--GH□KB	50Hz	N・m	1.1	1.4	1.9	2.3	2.9	3.4	3.61	4.8	5.7	6.8	7.12	8.6	10	10.3	11.6	12.4	15.5	18.6	20	20	20	20	20	20
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.8	48.9	58.1	69.3	72.6	87.7	100	105	118	126	158	189	200	200	200	200	200	200
	60Hz	N・m	0.92	1.1	1.5	1.8	2.3	2.8	3.01	3.8	4.6	5.5	5.73	6.9	8.3	8.3	9.7	10	12.5	15	18.8	20	20	20	20	20
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.7	38.7	46.9	56.1	58.4	70.1	84.7	84.6	98.9	102	127	153	192	200	200	200	200	200
EA-ABM5090-GU--GH□K EA-ABM5090-GU--GH□KB	50Hz	N・m	1.7	2	2.8	3.4	4.3	5.1	5.31	6.4	7.7	9.2	9.55	11.6	13.9	16.6	18.1	20	20	20	20	20	20	20	20	20
	50Hz	kgf・cm	17.3	20.4	28.6	34.7	43.9	52	54.2	65.3	78.6	93.9	97.4	118	142	169	184	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.4	1.7	2.3	2.8	3.5	4.2	4.43	5.2	6.2	7.5	7.81	9.4	11.3	13.5	14.5	18.8	20	20	20	20	20	20	20	20
	60Hz	kgf・cm	14.3	17.3	23.5	28.6	35.7	42.9	45.2	53.1	63.3	76.5	79.6	95.9	115	128	148	192	200	200	200	200	200	200	200	200
EA-ABM5120-GU--GH□K EA-ABM5120-GU--GH□KB	50Hz	N・m	2.3	2.7	3.8	4.5	5.6	6.8	7.01	8.5	10.2	12.2	12.5	15.3	18.4	20	20	20	20	20	20	20	20	20	20	20
	50Hz	kgf・cm	23.4	27.5	38.7	45.9	57.1	69.3	71.5	86.7	104	124	128	156	187	200	200	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.8	2.2	3	3.6	4.6	5.5	5.73	6.8	8.2	9.8	10.1	12.4	14.9	17.8	19.5	20	20	20	20	20	20	20	20	20
	60Hz	kgf・cm	18.3	22.4	30.6	36.7	46.9	56.1	58.5	69.5	83.6	100	103	126	152	181	199	200	200	200	200	200	200	200	200	200
EA-ABM6120-GU-**-GH□K	50Hz	N・m	2.22	2.6	3.6	4.3	5.4	6.5	6.42	8.1	9.7	11.7	11.6	14.7	17.6	21.1	23.2	29.4	35.2	40	40	40	40	40	40	40
	50Hz	kgf・cm	2.4	26.5	36.7	43.8	55	66.3	65.6	87.6	98.8	119	118	149	179	215	236	300	359	400	400	400	400	400	400	400
	60Hz	N・m	1.8	2.1	3	3.5	4.4	5.3	5.2	6.7	8	9.6	9.4	12	14.5	17.3	18.8	24.1	28.9	36.1	40	40	40	40	40	40
	60Hz	kgf・cm	18.3	21.4	30.6	35.7	44.8	54	53.3	68.3	81.6	97.9	95.9	122	148	176	192	245	295	368	400	400	400	400	400	400
EA-ABM6140-GU-**-GH□K	50Hz	N・m	2.5	3	4.2	5.1	6.3	7.6	7.2	9.5	11.4	13.7	13	17.2	20.6	24.7	26	34.3	40	40	40	40	40	40	40	40
	50Hz	kgf・cm	25.5	30.6	42.8	52	63.2	77.5	73.6	96.9	116	139	133	175	210	252	265	349	400	400	400	400	400	400	400	400
	60Hz	N・m	2.1	2.5	3.4	4.1	5.2	6.2	6.1	7.8	9.3	11.2	11	14	16.8	20.2	22	28	33.7	40	40	40	40	40	40	40
	60Hz	kgf・cm	21.4	25.5	34.6	41.8	53	63.2	62.2	79.5	94.8	114	112	142	171	206	224	285	343	400	400	400	400	400	400	400
EA-ABM6200-GU-**-GH□K	50Hz	N・m	3.71	4.46	6.19	7.43	9.28	11.1	11.9	13.9	16.7	20.1	20.8	25.2	30.3	36.3	40	40	40	40	40	40	40	40	40	40
	50Hz	kgf・cm	37.9	45.5	63.1	75.8	94.7	114	121	142	171	205	212	257	309	370	400	400	400	400	400	400	400	400	400	400
	60Hz	N・m	2.99	3.59	4.99	5.99	7.49	8.98	9.7	11.2	13.5	16.2	17.2	20.3	24.4	29.3	40	40	40	40	40	40	40	40	40	40
	60Hz	kgf・cm	30.6	36.7	50.9	61.1	76.4	91.7	98.9	115	138	165	175	207	249	299	400	400	400	400	400	400	400	400	400	400